TYPE |
PUBLICATION |
TARIKH PENERBITAN |
TYPE OF CONTRIBUTION |
REFEREED PUBLICATION |
JOURNAL |
Fast & Injurious: Reducing thermal osteonecrosis regions in the drilling of human bone with multi-objective optimization |
03/02/2020 |
Principal investigator, first author, corresponding author, 95% |
JOURNAL |
Comparison of bone temperature elevation in drilling of human, bovine and porcine bone |
01/08/2019 |
Principal investigator |
JOURNAL |
Drilling of bone: Effect of drill bit geometries on thermal osteonecrosis risk regions |
20/02/2019 |
Principal investigator |
JOURNAL |
Drilling of bone: thermal osteonecrosis regions induced by drilling parameters |
02/09/2019 |
Principal investigator |
JOURNAL |
Multi-objective optimization of surgical drill bit to minimize thermal damage in bone-drilling |
01/07/2019 |
Principal investigator |
ARTICLE |
Occupational Noise Reduction in CNC Striping Process |
01/03/2018 |
70% / Collection and Analyze of Data, Paper Writing |
CONFERENCE PAPER |
Effects of drilling parameters in numerical simulation to the bone temperature elevation |
02/04/2018 |
Principal Investigator |
JOURNAL |
Optimization of drilling parameters for thermal bone necrosis prevention |
01/10/2018 |
Principal Investigator |
JOURNAL |
Finite Element Study of the Effect of Substrate Properties in Micro-cutting Thin Workpiece Materials |
01/02/2016 |
100%, research leader |
CONFERENCE PAPER |
Bouc-Wen model parameter identification for a MR fluid damper using particle swarm optimization, . |
01/07/2013 |
Mohad Azraai Razman 60% master student work, Gigih Priyandoko 30% as main supervisior and Ahmad Razlan Yusoff 10% as co-supervisor, |
CONFERENCE PAPER |
Comparison of cooling performance between high thermal conductivity steel and hot work steel insert for experiemental tool using finite element analysis, |
01/07/2013 |
Zahari Taha 10% undergraduate supervisor, Ahmad Razlan Yusoff 25% supervisor, Mohd Ali Hanafiah Saharudin and Mohd Fawzi Zamri 60 % master student |
CONFERENCE PAPER |
Review on chip aluminium machining using direct recycling process, . |
01/07/2013 |
Mohamad Syahmi 75% as a master student and Ahmad Razlan Yusoff 25% is supervisor |
CONFERENCE PAPER |
The effect of various diamters orifice nozzle coolant on surface roughness performance in CNC turning, |
01/07/2013 |
Zainal Ariffin Selamat 70% phd student, Ahmad Razlan Yusoff 25% supervisor and M. M. Rahman 5% cosupervisor |
JOURNAL |
Improvement of take away cup design by using concurrent engineering approach |
28/02/2013 |
50% as supervisor for Siti Mahfuzah Mohamad |
JOURNAL |
Taguchi method on effect of lubrication condition on surface roughness in milling operation |
28/02/2013 |
25% contribution to Mohamad Shahmi Shahron, Nafrizuan Mat Yahaya |
CONFERENCE PAPER |
Analytical Chatter Stability Prediction for Irregular Types of Milling Tools, |
26/09/2012 |
50% Supervised and write paper with Muhammad Azuan Zainol Abidin (student) Hazami Che Hussain and Muhammad Hatifi Mansor |
CONFERENCE PAPER |
Mechanism of Variable Helix Tools in Suppressing Chatter using Process Damping for Machining Titanium Alloys at Low Cutting Speed, |
23/09/2012 |
25% contribution as supervisor for M.A. Shaharun with M.S.Reza |
CONFERENCE PAPER |
Parametric study of an electromagnetic energy harvester |
26/11/2012 |
Research with Mohad Firdaus Hassan, Ahmad Razlan Yusoff, Muhammad Hatifi Mansor |
CONFERENCE PAPER |
The effect of vibration and vehicle body movement of car suspension systems due to different damper characteristics in cornering tests, |
28/11/2012 |
25% supervised Zulkifli Nawawi with Nurazima Ismail |
JOURNAL |
Investigation of flow behaviour in minimum quantity lubrication nozzle for end milling processes, |
01/11/2012 |
SCOPUS INDEX. M S Najiha is PhD student, M M Rahman is a supervisor, A R Yusoff is a co-supervisor and K. Kadirgama is researcher |
JOURNAL |
Multiobjective optimization of milling tool geometry for chatter suppression and productivity improvement, |
01/02/2012 |
85% worked with Mohd Firdaus Hassan and Muhammad Hatifi Mansor |
JOURNAL |
Performance of Process Damping in Machining Titanium Alloys at Low Cutting Speed with Different Helix Tools. |
04/07/2012 |
50% supervisor for M.A. Shaharun M.S.Reza, K.A.Jalal |
JOURNAL |
Productivity Study and line balancing of Manufacturing Production line, |
30/06/2012 |
Supervisor for Hartini Mustafa |
JOURNAL |
Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece . |
04/07/2012 |
Co-researcher with M.S. Reza, M.A. Shaharun and T.M. Yusof |
BOOK CHAPTER |
A Refined Differential Evolution for Improving Optimization Process, , ISSN: 18650929 ISBN:978-364225452-9 DOI: 10.1007/978-3-642-25453-6 17.
|
01/05/2011 |
85% with Nafrizuan Mat Yahya |
JOURNAL |
*Optimisation of variable helix tool geometry for regenerative chatter mitigation |
28/02/2011 |
85 % contribution with supervisor N. D. Sims |
JOURNAL |
Experimental validation of chatter stability for variable helix end milling tools |
30/07/2010 |
Student supervised by Neil D Sims and Sam Turner |
JOURNAL |
*The role of tool geometry in process damped milling |
18/03/2010 |
70% main authors as a student (Ahmad R Yusoff, Sam Turner, Chris M Taylor and Neil D Sims) |
JOURNAL |
Determining Optimum EDM Parameters in Drilling of Small Holes by Taguchi Method, |
01/07/2009 |
Ahmad Razlan Yusoff, Zakri Ghazalli, Hazami Che Hussain (2009) |
JOURNAL |
Optimisation of variable helix end millings tools by minimising self excited vibration. |
01/09/2009 |
Student supervised by Neil D Sims |
CONFERENCE PAPER |
Non-Contact Electromagnetic Actuators for Chatter Stability Analysis of Milling Tools, |
08/09/2008 |
75% work with Neil D Sims and Richard E Clarke |
JOURNAL |
Emission Control in Palm Oil Mills Using Artificial Neural Network and Genetic Algorithm |
25/09/2004 |
75% contribution other authors to A.L.Ahmad, I.A.Azid, K.N.Seetharamu. |
JOURNAL |
Application of Back Propagation Neural Network in Predicting Palm Oil Mill Emission. |
01/07/2003 |
Student supervied by I.A. Azid, A.L. Ahmad and K.N. Seetharamu. |
CONFERENCE PAPER |
Predicting Combined-Cycle Natural Gas Power Plant Emission By Using Artificial Neural Networks. 0 |
24/09/2000 |
75%. Student under supervised by I.A. Azid, Z.M. Ripin, M.S. Aris, A.L. Ahmad, K.N. Seetharamu |
NON-REFEREED PUBLICATION |
CONFERENCE PAPER |
Analysis of initial design of electromagnetic actuator using finite element analysis. |
08/09/2012 |
Norlida Jamil 50% master student Muhamad Hatifi Mansor 25% researcher and Ahmad Razlan Yusoff 25 % leader |
CONFERENCE PAPER |
Nonlinear Effect on Frequency Response Functions of Cutting Tool for Chatter Stability Prediction, |
09/07/2012 |
75% research with Gigih Priyandoko and Muhammad Hatifi Mansor (2012) |
CONFERENCE PAPER |
Review on elements of JIT implementation, |
19/05/2012 |
A A Nurul Fateha 75% UG student , Nafrizuan Mat Yahya 25% supervisorand Ahmad Razlan Yusoff 5 % researcher, |
CONFERENCE PAPER |
Application of Taguchi method mold and die polishing process. |
08/09/2012 |
Mohd Nizam Mokhtar 25% as a student Siti Fatihah Adnan 50% student and Ahmad Razlan Yusoff 25% supervisor |
JOURNAL |
Literature review of electromagnetic for dynamic modal testing applications |
31/12/2012 |
Supervised Student named Norlida Jamil with Mohamad Hatifi Mansor |
JOURNAL |
Minimum quantity lubrication flow analysis in end milling process: A computational fluid dynamics approach |
31/12/2012 |
Co-supervisor for M S Najiha |
CONFERENCE PAPER |
Improvement of milling tool geometry optimization using a refined differential evolution algorithms for chatter avoidance, |
26/07/2011 |
75% research with Nafrizuan Mat Yahya and Mohamed Reza Zalani Mohamed Suffian |
CONFERENCE PAPER |
Optimization of EDM Machining Parameters on AISI 1020 Carbon Steel Workpiece using Grey Relational Analysis, at |
25/11/2011 |
15% contribution with M.S. Reza and M.A. Shaharun |
JOURNAL |
Literature review of optimization techniques for chatter suppression in machining, |
31/12/2011 |
Research with Mohamed Reza Zalani Mohamed Suffian and Mohd Yusof Taib |
JOURNAL |
Simulation Study on Cutting Tool System using Intelligent Active Force Control |
31/12/2011 |
15% research project with Muhammad Hatifi Mansor, Mohd Firdaus Hassan |
JOURNAL |
Determination of optimal variable helix and variable pitch tool geometry for chatter suppression, |
30/06/2011 |
Student supervised by Neil D Sims |
CONFERENCE PAPER |
Identification of Nonlinear Chatter Instability in Machining Processes for a Special Milling Tool |
29/11/2010 |
75% research under supervised Neil D Sims (2010), |
CONFERENCE PAPER |
Period one chatter instability of variable pitch milling tools, |
23/05/2010 |
85% worked with Neil D Sims (2010), |
CONFERENCE PAPER |
Application of variable helix abd variable pitch milling tool for chatter mitigation and process damping |
03/12/2010 |
100% contribution from phd research |
JOURNAL |
Biomass Boiler Emission Analysis using Artificial Neural Network. |
31/07/2009 |
75% student under supervised by I.A.Azid |
JOURNAL |
Combining Genetic Algorithm and Artificial Neural Network to Optimize Biomass Steam Power Plant Emission. |
31/07/2009 |
75% student under supervised by I.A.Azid |
CONFERENCE PAPER |
Combination of Multi Objective Genetic Algorithm and Polynomial Function to Optimize Cam Design, |
16/07/2007 |
25% supervised student M.Y. Norninawti with M.F.F. Ab. Rashid |
CONFERENCE PAPER |
A Preliminary Study Of Noise Exposure Assessment At A Malaysian Construction Site |
13/11/2006 |
10% work with Ahmad Rasdan Ismail, Baba Md Deros, Rozli Zulkifli, Azimin Samsul Mohd Tazilan from UKM |
CONFERENCE PAPER |
Design of Cam Profile used in Valvetrain of Internal Combustion Engine by using Polynomial and cycloidal Functions |
14/02/2006 |
Ahmad Razlan Yusoff 85% and Mohd Zuki Sall 25% |
CONFERENCE PAPER |
Reverse Engineering Approach in developing of a Cam profile for Internal Combustion Engine |
17/05/2006 |
Ahmad Razlan Yusoff 85% and Rosdi Daud 25% |
CONFERENCE PAPER |
Adaptive Neuro Fuzzy Inference System Prediction for a New Refrigerator Rotary Compressor Performance. . |
19/10/2006 |
Ahmad Razlan Yusoff 25 % Mohd Yusof Taib 25% Mohd Fathi Alias 50% |
CONFERENCE PAPER |
Balancing Automotive Production Line with Simple Assembly Line Balancing Type General |
15/05/2006 |
75%.Research project with Wan Mansor Wan Muhammad, Mohd Fazli Ismail and Zakri Ghazalli (2006) |
CONFERENCE PAPER |
Productivity and Line Balancing Improvement of Automotive Assembly Line through Discrete Event Simulation, . |
03/07/2006 |
75% work with Mohd Fazli Ismail and Zakri Ghazalli (2006) |
CONFERENCE PAPER |
Development of Cam used in Valvetrain of Internal Combustion Engine using Genetic Algorithm and Polynomial Spline: A Feasibility Study. |
09/08/2006 |
Ahmad Razlan Yusoff 80% and Mohd Zuki Salleh 20% |
CONFERENCE PAPER |
A Backpropagation Neural Networks Algorithm for Online Management of PEM Fuel Cells for Residential Application. . |
18/10/2005 |
A.R.Yusoff 75% and M.R. Mohamed 25% |
CONFERENCE PAPER |
Perbandingan analisa kepekaan rangkaian neural buatan emisi dari dua kilang kelapa sawit, |
10/10/2005 |
Ahmad Razlan Yusoff 90 % with Ahmad Rasdan Ismail |
CONFERENCE PAPER |
Boundary Layer Flow Due to a Moving Flat Prediction in Micropolar Fluid based on Artificial Neural Network |
06/09/2005 |
50% research with Mohd Zuki Salleh |
CONFERENCE PAPER |
Genetic Algorithms and Artificial Neural Networks Optimization of Particulate Matters from Biomass Boiler Emission. |
18/10/2005 |
75 % as master student A.R.Yusoff for supervisor I.A.Azid |
JOURNAL |
Sensitivity Analysis via Artificial Neural Network of Biomass Boiler Emission. |
31/07/2004 |
75% student under supervised by Ahmad Razlan Bin Yusoff and Ishak Abdul Azid |
CONFERENCE PAPER |
Monitoring Palm Oil Mill Emission by Using Artificial Neural Network, |
23/09/2001 |
60%. Student under supervised by I.A. Azid, Z.M. Ripin, K.N. Seetharamu and A.L. Ahmad, (2001 |
EDITORIAL ACTIVITITIES |
JOURNAL |
Institute of physics (IOP) Conference Series: Materials Science and Engineering, Volume 36 |
04/07/2012 |
Cheif-in-editor for International conference in mechanical engineering research (ICMER 2011) 5-7 Dis 2011, Kuantan. |
BOOKS |
Universiti Malaysia Pahang |
05/12/2011 |
Chief-in-Editor for Proceeding of International Conference in mechanical engineering research (ICMER 2011) 5-7 Dis 2011, Kuantan. ISBN 978-960-01-2035-5 |
BOOKS |
Universiti Malaysia Pahang Publisher |
03/12/2010 |
5. Editor Panel for Proceeding of second national Conference in mechanical engineering & post graduiate studies (NMCER 2),vol.1&2, 3-4 Dis 2010, Faculty of Mechanical Engineering. ISBN 978-967-0120-04-1 |
BOOKS |
Kolej Universiti Kejuruteraan & Teknologi Malaysia (KUKTEM) |
31/07/2005 |
10% Panel Penyusun: Panduan Program Softskills |
REVIEWER |
BOOKS |
2013 IEEE Symposium on Humanities, Science & Engineering Research - Applied Sciences and Technolog |
23/06/2013 |
Review 2 papers for the conference |
BOOKS |
4 International Conference on Advanced Material Engineering & Technology 2013 (ICAMET 2013) |
28/11/2013 |
Review for 10 papers for the conference |
BOOKS |
Proceeding of The 3rd International Malaysia-Ireland joint Symposium on Engineering, Science and Bus |
02/09/2013 |
Reviewer papers |
JOURNAL |
Jurnal Teknologi |
01/10/2013 |
Artikel: SURFACE STUDY IN A NON-CONVENTIONAL (ELECTRICAL DISCHARGE MACHINING) PROCESS FOR GRADE 6 TiALLOY. |
BOOKS |
5 National Conference on Post Graduate Studies (NConPGS 2012), Centre for Graduate Studies, Univers |
08/09/2012 |
Review on 5 papers for teh conference |
BOOKS |
6 International Conference on Advanced Material Engineering & technology 2012 (ICAMET 2012), |
28/12/2012 |
10 papers review for International Conference on Advanced Material Engineering & technology 2012 (ICAMET 2012), Centre for Advanced Materials and Geopolymer, Universiti Malaysia Perlis |
BOOKS |
7 2012 IEEE Symposium on Business, Engineering and Industrial application (ISBEIA 2012) |
23/09/2012 |
review 2 papers for 2012 IEEE Symposium on Business, Engineering and Industrial application (ISBEIA 2012) |
BOOKS |
8 2012 IEEE Symposium on industrial electronics and application (ISIEA 2012) |
23/09/2012 |
review 3 papers for 2012 IEEE Symposium on industrial electronics and application (ISIEA 2012) |
JOURNAL |
9 International Journal of Mechanical Engineering and Sciences(JMES), Faculty of Mechanical Enginee |
01/12/2012 |
Review for 2 papers for International Journal of Mechanical Engineering and Sciences(JMES), Faculty of Mechanical Engineering, Universiti Malaysia Pahang. |
BOOKS |
10 The 1st International Conference on Advanced Manufacturing (ICAM 2011) |
04/04/2011 |
review 7 papers for The 1st International Conference on Advanced Manufacturing (ICAM 2011) |
BOOKS |
11 The second International Conference on Software Engineering and Computer System (ICSE 2011) |
20/09/2011 |
Reviewer for 7 papers in The second International Conference on Software Engineering and Computer System (ICSE 2011) |