TYPE |
PUBLICATION |
TARIKH PENERBITAN |
TYPE OF CONTRIBUTION |
REFEREED PUBLICATION |
JOURNAL |
Mechanical characterisation of water-jet shot peened H13 tool steel surface |
28/09/2022 |
70% on writing and reviewing |
CONFERENCE PAPER |
Laser cladding process to enhanced surface properties of hot press forming die: A review |
18/02/2021 |
30% on reviewing |
CONFERENCE PAPER |
Optimization of laser melting parameter to enhanced surface properties in hot press forming die |
18/02/2021 |
30% on reviewing |
JOURNAL |
Effects of silica on mechanical and rheological properties of EPDM-based magnetorheological elastomers. |
13/09/2021 |
10% on reviewing |
JOURNAL |
Thermally-induced crack evaluation in H13 tool steel |
06/11/2017 |
50% Contribution. Contribute as author as well as reviewer. |
BOOK CHAPTER |
Biological Adhesion |
20/05/2016 |
15% as an updating author |
BOOK CHAPTER |
Composites for Biomedical Applications |
15/06/2016 |
15% as an updating author |
BOOK CHAPTER |
Optical Properties of Surface Layers Enhanced Raman Scattering |
23/03/2016 |
15% as an updating author |
BOOK CHAPTER |
Poly(hydroxyalkanoate)s |
16/07/2016 |
15% as an updating author |
CONFERENCE PAPER |
Thermal Fatigue of Die-Casting Dies: An Overview |
29/08/2016 |
10% on reviewing |
JOURNAL |
Interface bonding of NiCrAlY coating on laser modified H13 tool steel surface |
01/06/2016 |
40% on analysis and reviewing |
JOURNAL |
Surface modification of AISI H13 tool steel by laser cladding with NiTi powder |
01/04/2016 |
50% on analysis, discussion and reviewing |
BOOK CHAPTER |
X-Ray Topography |
28/10/2015 |
15% as an updating author |
JOURNAL |
Development of High Thermal Conductivity Tool Steel for Hot Press Forming: An Overview |
08/06/2015 |
10% on reviewing |
JOURNAL |
Development of High Thermal Conductivity Tool Steel in Hot Press Forming: An Overview |
01/12/2015 |
10% on writing and reviewing |
BOOK CHAPTER |
Rapid Solidification Processing and Bulk Metallic Glass Casting |
07/04/2014 |
60% on results analysis and writing |
BOOK CHAPTER |
Routes to Spheroidal Starting Material for Semi-Solid Metal Processing |
07/04/2014 |
10% reviewing |
JOURNAL |
An Investigation of Phase Crystallinity in Laser Modified Yttria Stabilized Zirconia (YSZ) Thermal Barrier Coating |
07/05/2014 |
40% on results analysis and writing |
JOURNAL |
Effects of Thermal Fatigue on Laser Modified H13 Die Steel |
02/06/2014 |
30% on writing, results analysis and reviewing |
JOURNAL |
Fluid-Particle Separation of Magnetorheological(MR) Fluid In MR Machining Application |
07/05/2014 |
20% on results analysis and writing |
JOURNAL |
Hot Press Forming of 22MnB5 Steel Using Full Factorial Design of Experiment (DOE) |
10/11/2014 |
40% on results analysis and writing |
JOURNAL |
Optimisation of Pulsed Nd: YAG Laser Processing of Gray Cast Iron for Enhanced Surface Properties |
10/11/2014 |
50% on results analysis and writing |
CONFERENCE PAPER |
Optimization of Quenching Process In Hot Press Forming of 22mnb5 Steel For High Strength Properties |
04/11/2013 |
40% on writing, results analysis and reviewing |
JOURNAL |
Full Factorial Design to Study Material Parameters of Magnetorheological Fluid |
04/03/2013 |
10% on results analysis |
JOURNAL |
Laser Surface Modification of AISI 1025 Low Carbon Steel using Pulsed Nd:YAG Laser for Enhanced Surface Properties |
01/06/2013 |
40% on results analysis and reviewing |
JOURNAL |
Thermal Barrier Coatings on Laser Surface Modified AISI H13 Tool Steel Using Atmospheric Plasma Spray Technique |
03/06/2013 |
40% on results analysis, writing and reviewing |
CONFERENCE PAPER |
Laser Cutting of Glass Fiber Reinforced Polymer Composite |
02/04/2012 |
10% on writing and reviewing |
JOURNAL |
An Investigation of Phase Transformation and Crystallinity in Laser Surface Modified H13 Steel |
30/08/2012 |
80% on experimental works, results analysis and writing |
JOURNAL |
Atomic Diffusion in Laser Surface Modified AISI H13 Steel |
12/09/2012 |
80% on experimental works, results analysis and writing |
CONFERENCE PAPER |
Designing Pulse Laser Surface Modification of H13 Steel Using Response Surface Method |
17/01/2011 |
80% on experimental works, results analysis and writing |
CONFERENCE PAPER |
Laser Surface Modification of H13 Die Steel using Different Laser Spot Sizes |
04/05/2011 |
80% on experimental works, results analysis and writing |
JOURNAL |
Laser micro-processing of amorphous and partially crystalline Cu 45 Zr 48 Al 7 alloy |
15/06/2010 |
60% on experimental works, results analysis and writing |
JOURNAL |
Surface modification of HVOF of thermal sprayed WC-CoCr coatings by laser treatment |
12/06/2010 |
20% on experimental works and results analysis |
JOURNAL |
Thermal Fatigue Properties Of Laser Treated Steels At Semi Solid Processing Temperature |
12/06/2010 |
60% on experimental works, results analysis and writing |
JOURNAL |
Thermal Stability Of Laser Treated Die Material For Semi-Solid Metal Forming |
15/12/2009 |
70% on experimental works, results analysis and writing |
CONFERENCE PAPER |
An Overview of Laser Surface Modification of Die Steels |
03/09/2008 |
70% on experimental works, results analysis and writing |
JOURNAL |
The effects of porosity on tensile properties of cast particle reinforced MMC |
18/08/2006 |
80% on experimental works, results analysis and writing |
JOURNAL |
The effects of porosity on mechanical properties of cast discontinuous reinforced metal-matrix composite |
07/03/2005 |
80% on experimental works, results analysis and writing |
JOURNAL |
Effects of porosity on mechanical properties of metal matrix composite: an overview |
02/06/2004 |
80% on experimental works, results analysis and writing |
CONFERENCE PAPER |
The Effect of Porosity on Fatigue for Cast Metal Matrix Composites |
06/01/2003 |
80% on experimental works, results analysis and writing |
JOURNAL |
The Effects of Stirring Speed and Reinforcement Particles on Porosity Formation in Cast MMC |
02/06/2003 |
80% on experimental works, results analysis and writing |
NON-REFEREED PUBLICATION |
ARTICLE |
An overview of cast hot press forming die materials |
01/08/2014 |
100% on writing |
EDITORIAL ACTIVITITIES |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
30/03/2023 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
24/03/2022 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
28/06/2022 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
28/12/2022 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
30/09/2022 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
05/03/2021 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
17/06/2021 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
19/09/2021 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
21/12/2021 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
07/10/2020 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
10/07/2020 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
30/12/2020 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
31/03/2020 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
06/07/2019 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
07/10/2019 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
26/03/2019 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
31/12/2019 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
01/03/2018 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
02/07/2018 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
11/10/2018 |
40% evaluating, proofreading and editing as chief editor |
JOURNAL |
International Journal of Automotive and Mechanical Engineering |
27/12/2018 |
40% evaluating, proofreading and editing as chief editor |
REVIEWER |
JOURNAL |
Journal of Materials Engineering and Performance |
13/04/2022 |
100% - provide comments and make a decision |
JOURNAL |
Journal of Materials Engineering and Performance |
13/10/2022 |
100% - provide comments and make a decision |
JOURNAL |
Manufacturing Letters |
21/08/2021 |
100% - provide comments and make a decision |
JOURNAL |
Materials Research Ibero-American Journal of Materials |
01/09/2016 |
100% Reviewer |
BOOKS |
Taylor and Francis |
02/11/2015 |
100% on review and comments |
JOURNAL |
Journal of Industrial Technology (SIRIM) |
09/12/2013 |
Editor and Reviewer |
JOURNAL |
Optics and Lasers in Engineering |
24/06/2013 |
100% Reviewer |