TYPE |
PUBLICATION |
TARIKH PENERBITAN |
TYPE OF CONTRIBUTION |
REFEREED PUBLICATION |
CONFERENCE PAPER |
An Investigation of Emission Characteristics of a Turbocharged Common Rail Direct Injection Diesel Engine Fueled with Diesel-Butanol Blends |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
An Investigation on Performance of Diesel Engine Using Biodiesel-Butanol Blends Fuel |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Copper (II) Oxide Nanoparticle as Friction Reduction and Anti-Wear Additive in Lubricationg Oil |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Development of Strand Burner Test by Using Alumnized Ap/HTPB |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Experimental Analysis on the Emissions of Single Cylinder Diesel Engine Run with Low Temperature Combustion (LTC) Mode with Diesel, Palm Biodiesel and Ethanol-Biodiesel Blend |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Experimental Investigations on Engine Performance and Exhaust Emissions in a HCCI Engine Fuelled with Diesel-Ethanol Fuel Blendes |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Microstructure and Wear Behaviour of Engine Oil Treatment Added Bio-Lubricant |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Optimization on Wear Performance of Anti Wear Additive Added Biolubricant |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Optimization on Wear Performance of Waste Cooking Oil As Engine Additive Using RSM |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Performance Combustion Characteristics and Emissions of Ci Engine Operated with Fusil Oil - Diesel Blend |
01/01/2016 |
100% for Researh and Paper Writing |
CONFERENCE PAPER |
Performance and Emission Characteristics of a Diesel Engine Fueled with Fish-Oil-Biodiesel |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Renewable Energy, the Future of Solar Energy |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Study of a Turbocharged Common Rail Direct Injection Diesel Engine on Performance and Emission with n-Butanol Diesel Blends |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Tribological Behaviour Improvement of Lubricant Using Copper (ii) Oxide Nanoparticles as Additive |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
Cutting Force and Chip Formation in End Milling Operation When Machining Nickel-Based Super Alloy, Hastelloy C-2000 |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
Dual Fuel in Internal Combustion Engines : A Comprehensive Review, Renewable & Sustainable Energy Reviews |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
Force Convection Heat Transfer of AI203 Nanofluid for Different Based Ratio of Water and Ethylene Glycol Mixture |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
Micro Combine Heat and Power to Provide Heat and Electrical Power Using Biomass and Gamma-type Stirling Engine |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
Nanoparticles Application in a Domestic Refrigerator for Performance Enhancement |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
Optimization of Abrasive Machining of Ductile Cast Iron Using TIO2 Nanoparticles : A Multilayer Perceptron Approach |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
Optimization of Numerical Analysis on Flow and Heat Transfer Characteristics of Supercritical CO2 in Micro-Channels |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
Performance, Combustion Characteristics and Emissions of Ci Engine Operated with Fusel Oil |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
Prediction of Marine Diesel Engine Performance by Using Artificial Neural Network Model |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
Recent Development For HCCI Engine : A Review, Renewable & Sustainable Energy Reviews |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
The Effect of Adding Fusel Oil to Diesel on the Performance and Emissions Characteristics in Single Cylinder CI Engine |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
The Potential for Using Fusel Oil as an Alternative Fuel for Spark-Ignition Engines : A Review, Renewable & Sustainable Energy Reviews |
01/01/2016 |
100% for Research and Paper Writing |
JOURNAL |
Tribological Behavior Improvement of Lubricant Using Copper (2) Oxide Nanoparticles as Additive |
01/01/2016 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Adaptive Neuro-Fuzzy Inference System (ANFIS)to Predict Ci Engine Parameter Fueled with Nano-Particles Additive to Diesel Fuel |
01/01/2015 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Additive Manufacturing Paths to Performance, Innovation and Development |
01/01/2015 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Analysis of Modifications on a Spark Ignition Engine for Operation with Natural Gas |
01/01/2015 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Computational Analysis of Dissimilar Valve Lift (DVL) Swirl on a Bi-Fuel Compressed Natural Gas (CNG) Engine |
01/01/2015 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Ethylene Glyco Based Zno Nano Fluids as a Coolant for Grinding of Aisi P20 Tool Steel |
01/01/2015 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Numerical Modeling on Homogeneous Charge Compression Ignition (HCC) Combustion Engine Fueled by Diesel-Ethanol Blends |
01/01/2015 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Optimization of Abrasive Machining of Ductile Cast Iron Using Tio2 Nanoparticles : A Multilayer Perceptron Apporach |
01/01/2015 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Performance and Emission Characteristics of Common Rail Compression Ignition Engine with Water Injection |
01/04/2015 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Performance and Emission Characteristics of a Ci Engine Fueled with Nanodiesel |
01/01/2015 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Support Vector Machine to Predict Diesel Engine Performance and Emission Parameters Fueled with Nano-Particles Additive to Diesel Fuel |
01/01/2015 |
100% for Research and Paper Writing |
JOURNAL |
Effect of ZnO Nano Materials on Grinding Surface Finishing |
01/01/2015 |
100% for Research and Paper Writing |
JOURNAL |
Multi-Objective Optimization of Minimum Quantity Lubrication in End Milling of Aluminum Alloy AA6061T6 |
01/01/2015 |
100% for Research and Paper Writing |
JOURNAL |
Performance and Emission Characteristics of Common Rail Compression Ignition Engine with Water Injection |
01/01/2015 |
100% for Research and Paper Writing |
JOURNAL |
Air Fuel Ratio for the Mixture of Biogas and Hydrogen on Non-Premixed MILD Combustion |
01/01/2014 |
100% for Research and Paper Writing |
JOURNAL |
Effect of Air-Fuel Ratio on Temperature Distribution and Pollutants for Biogas MILD Combustion |
01/01/2014 |
100% for Research and Paper Writing |
JOURNAL |
MILD Combustion : The Future for Lean and Clean Combustion Technology |
01/01/2014 |
100% for Research and Paper Writing |
JOURNAL |
Simulation of Biogas Combustion in MILD Burner |
01/01/2014 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Detail Guide for CFD on the Simulation of Biogas Combustion in Bluff-Body MILD Burner |
01/01/2013 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Discretization of Three Dimensional Non-Uniform Grid : Conditional Moment Closure Elliptic Equation Using Finite Difference Method |
01/01/2013 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
MILD Combustion : The Future for Lean and Clean Combustion |
01/01/2013 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
The Air Fuel Ratio Study for the Mixture of Biogas and Hydrogen on MILD Combustion Bluff-Body Burner |
01/01/2013 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
The Development of MILD Combustion Open Burner Experimental Setup |
01/01/2013 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
The Effect of Fuel and Air Injection Velocity on Biogas Ignition of Bluff-body MILD Burner |
01/01/2013 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
The Numerical Simulation for the Temperature Distribution of Biogas Combustion in Bluff-Body MILD Burner |
01/01/2013 |
100% for Research and Paper Writing |
JOURNAL |
Analysis of Recirculation Zone and Ignition Positionof Non-Premixed Bluff-Body for Biogas MILD Combustion |
01/01/2013 |
100% for Research and Paper Writing |
JOURNAL |
Design and Development of MILD Combustion Burner |
01/01/2013 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
A Preliminary Study of Control Parameters for Open Furnace MILD Combustion using CFD |
01/01/2012 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
MILD Combustion : A Review Toward Open Furnace Combustion |
01/01/2012 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Numerical Investigation of Influence of Air and Fuel Dilution for Open Furnace MILD Combustion Burner |
01/01/2012 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
The Modelling of the Effect of Air Fuel Ratio on Unburned Hydrocarbons for MILD Combustion |
01/01/2012 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
The Study of Air Fuel Ratio for MILD Combustion of Biogas on Bluff-Body Burner |
01/09/2012 |
100% for Research and Paper Writing |
JOURNAL |
A Review of MILD Combustion and Open Furnace Design Consideration |
01/01/2012 |
100% for Research and Paper Writing |
JOURNAL |
Modelling of Non-Premixed Turbulent Combustion of Hydrogen Using Conditional Moment Closure Method |
01/01/2012 |
100% for Research and Paper Writing |
JOURNAL |
Optimization of Surface Roughness in End Milling Using Potential Support Vector Machine Arabian Journal for Science and Engineering |
01/01/2012 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
A Hybrid EMST-Modified Curls Model for Turbulent Combustion Modelling |
01/11/2011 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Estimation of Solar Radiation by Artificial Neural Networks with Quick Propagation Algorithm |
01/09/2011 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Implementation of Conditional Moment Closure using Taylor Expansion and Finite Different Method |
01/12/2011 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Optimization of Cylindrical Grinding for High Quality Surface Finish |
01/01/2011 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Stydy of Random Particle Interactions for Analysis of Diffusion Lengths in Turbulent Combustion Modelling |
01/11/2011 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
The Potential of Wind and Solar Energy in Malaysia East Coast : Preliminary Study at UMP |
01/04/2011 |
100% for Research and Paper Writing |
JOURNAL |
Current Research Trends on Dry, Near-Dry and Powder Mixed Electrical Discharge Machining |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Estimation of Solar Radiation by Artificial Neural Networks with Quick Propagation Algorithm |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Experimental Study on Heat Transfer Coefficient and Friction Factor of AI2)3 Nanofluid in a Packed Bed Column |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Heat Transfer Characteristics in Exhaust Port for Hydrogen Fuelled Port Injection Engine : A Transient Approach |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Identification of Dynamics Modal Parameter for Car Chassis |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Linear Static Response of Suspension Arm Based on Artifical Neural Network Tecnique |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Modelling, Analysis and Fatigue Life Prediction of Lower Suspension Arm |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Optimization of Machining Parameters on Tool Wear Rate of Ti-6AI-4V Through EDM Using Copper Tungsten Electrode : A Statistical Approach |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Optimization of Machining Parameters on Tool Wear Rate of Ti-6Ai-4V Through EDM using Copper Tungste |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Particle Swarm Optimisation Prediction Model for Surface Roughness |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Particle Swarm Optimization Prediction Model for Surface Roughness |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Pattern Recognition Method to Predict Recycling Strategy for Electronic Equipment |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
The Potential of Wind and Solar Energy in Malaysia East Coast : Preliminary Study at Universiti Malaysia Pahang |
01/01/2011 |
100% for Research and Paper Writing |
JOURNAL |
Tool Life and Wear Mechanism When Machining Hastelloy C-22HS |
01/01/2011 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
A New Approach to Design of Suspension Arm using Central Composite Design of Experiment in Conjunction with FEA |
03/12/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
A Review of Minimum Quantity Lubricant on Machining Performance |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
A Study on Plastic Strain Distribution using Finite Element Analysis |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
An Experimental Investigation on Characteristics of Electrical Discharge Machining Using High-Strength Steel Alloy |
01/04/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Analysis of Auto CarJack |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Analysis of Automotive Drive Shaft using Finite Element Method |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Analysis of Nanofluid Forced Convection Turbulent Heat Transfer in a Tube with Twisted Tape Inserts |
01/09/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Analysis of Surface Roughness for Laser Cutting on Acrylic Sheets using Response Surface Method |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Artificial Intelligence Techniques for Machining Performance : A Review |
03/12/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Design of Compressed Natural Gas (CNG) Mixer using Computational Fluid Dynamics |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Design of Connecting Rod of Internal Combustion Engine : Topology Optimization Approach |
03/12/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Development of Axiomatic-DFA Software for Remanufacuturing System |
28/06/2010 |
100% for research and paper writing |
CONFERENCE PAPER |
Development of Statistical Model to Predict Ra and Rz in Laser Cutting |
28/07/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Effect of Engine Speed on Common Rail Injection System for Hydrogen Engine |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Effect of Intake Conditions on Heat Transfer Characteristics for Port Injection Hydrogen Fueled Engine |
10/09/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Effect of Intake Conditions on Heat Transfer Characteristics for the Hydrogen Fueled Engine |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Experimental and Modelling Investigation of the Performance Characteristics on Diesel HCCI with Hydrogen Additive - A Review |
03/12/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Failure Analysis of Heat Exchanger Tubes in the Indirect Air-Cooled Rotary Shell |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Heat Transfer Characteristics in Exhaust Port for Hydrogen Fueled Port Injection Engine : A Transient Approach |
28/06/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Influence of Engine Speed and Injection Timings on In-Cylinder Heat Transfer for Port Injection Hydrogen Fueled Engine |
03/12/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Investigation on Modal Transient Response Analysis of Engine Crankshaft Structure |
28/07/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Mathematical Modelling of Material Removal Rate for Ti-5AI-2.5Sn through EDM Process : A Surface Response Method |
01/01/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Mechanical Behaviour of Polymeric Foam Core at Various Orientation Angles |
28/07/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Multilayer Percepttron on Model to Predict Material Removal Rate of Ti-15-3 in Electrical Discharge Machining |
03/12/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Optimization Modelling of Copper Electrode and Negative Polarity on Material Removal Characteristics in EDM of Titanium Alloy (Ti-6AI-4V) |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Optimization of Noise Level to Enhance Industrial Workers Performance using Artificial Neural Network |
01/06/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Optimized Tool Life by Partial Swarm |
01/04/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Optimizing Humidity Level to Enhance Worker Performance in Automotive Industry |
01/07/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Optimizing Modeling of Material Removal in Electrical Discharge Machining Process on Ti-^AI-4V using Response Surface Approach |
28/06/2010 |
100 for Research and Paper Writing |
CONFERENCE PAPER |
Performance of Carbide Cutting Tools when Machining of Nickle Based Alloy |
01/04/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Prediction Modelling of Power and Torque in End-Milling |
28/07/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Prediction of Fatigue Life on Lower Suspension Arm Subjected to Variable Amplitude Loading |
03/12/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Prediction of Linear Static Response of Suspension Arm Based on Artificial Intelligence Technique |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Robust Design of Suspension Arm Based on Stochastic Design Improvement |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Robust Design of Suspension Arm Based on Stochastic Design Improvement |
01/01/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Single Order Response Surface Model to Characterize Surface Roughness on Titanium Alloy (Ti-6AI-4V) in Electrical Discharge Machining Process |
28/06/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
The Analysis of Heat Distribution in End-Milling |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
The Prediction of Recycling Strategy for Electronic Equipments for Sustainable Future |
01/06/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Theoretical Torque Comparison between Revetec Engine and Conventional Internal Combustion Engine |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Thermal Analysis of Open-Cycle Regenerator Gas-Turbine Power-Plants |
01/05/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Validation of Turbulent Flow Heat Transfer Data of Water Based Nanofluids |
01/07/2010 |
100% for Research and Paper Writing |
JOURNAL |
Analysis of Entry Qualification for Student Performance : An Intelligence Approach |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Aspects of Wear Mechanisms of Carbide Tools when Machining Hastelloy C-22HS |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Development of Statistical Model to Predict Ra and Rz in Laser Cutting, WIT Transactions on the Built Environment o |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Effect of Dry Cutting on Force and Tool Life When Machining Aerospace Material |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Effect of Dry Cutting on Force and Tool Life when Machining Aerospace Material Proceedings of World Academy of Science |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
End Milling Surface Roughness Optimization using Response Ant Colony, Sensors |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Experimental Investigation on Characteristics of Electrical Discharge Machining of Stainless Steel 304 |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Experimental Investigations of Oxygen Stripping From Feed Water in a Spray cum Tray Type Deaerator |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Heat Transfer Characteristic of Intake Port for Spark Ignition Engine : A Comparative Study |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Heat Transfer Characteristics of Intake Port for Spark Ignition Engine : A Comparative Study |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
In-Cylinder Heat Transfer Characteristics of Hydrogen Fuelled Engine : A Steady State Approach |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Investigation on Different Method of Joining for Automotive |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Investigation on Modal Transient Response Analysis of Engine Crankshaft Structure |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Machining of Ti-6AI-4V Through EDM Using Copper Tungsten Electrode and Positive Polarity |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Mechanical Behaviour of Polymeric Foam Core at Various Orientation Angle |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Modeling of Material Removal on Machining of Ti-6Ai-4V through EDM using Copper Tungsten Electrode and Positive Polarity |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Optimisation of Heat Affected Zone by Partial Swarm Optimisation in Air Plasma Cutting Operation |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Optimised Tool Life by Partial Swarm Optimisation |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Optimization of Machining Parameters on Surface Roughness in EDM of Ti-6AI-4V using Response Surface Method |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Performance of Carbide Cutting Tools When Machining of Nickel Based Alloy |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Prediction Modelling of Power and Torque in End-Milling, WIT Transactions on the Built Environment |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Prediction Modelling of Surface Roughness for Laser Beam Cutting on Acrylic Sheets |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Prediction of Recycle Method Using Relevance Vector Machine |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Thermal Analysis of Open-Cycle Regenerator Gas-Turbine Power-Plant |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Transient In-Cylinder Gas Flow Characteristics of Single Cylinder Port Injection Hydrogen Fuelled Engine |
01/01/2010 |
100% for Research and Paper Writing |
JOURNAL |
Trends of Air Fuel Ratio on Engine Performance of Four Cylinder Direct Injection Hydrogen Fuelled Engine |
01/01/2010 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Development of Genetic Algorithms and Multilayer Perceptron Neural Network (MPNN) Model to Study the Student Performance in Thermodynamics |
16/05/2009 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Distribution of Temperature when End Milling Aged Hardened Alloy |
16/02/2009 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Energy Absorption Efficiency of Polymeric Foams under Static Compression Loading |
16/02/2009 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Experimental and Numerical Study of Cutting Force in End-Milling Operation using Statistical Method |
07/05/2009 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Prediction of Chatter in CNC Machining Based on Dynamic Cutting Force for Ball End Milling |
16/02/2009 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Quantitative Assessment of Bachelor Mechanical Engineering Programs by Senior Exit Surveys at UMP |
16/05/2009 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Response Surface Method and Neural Network to Determine Surface Roughness for Laser Cutting on Acrylic Sheets |
07/05/2009 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Surface Roughness Analysis in End Milling with Response Ant Colony Optimization |
15/05/2009 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
The Effect of Entry Qualification to the student Performance |
20/06/2009 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
The Effect of Entry Qualifications and Gender towards Student Performance |
16/05/2009 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Tool Life Analysis by Partial Swarm Optimisation |
15/05/2009 |
100% for Research and Paper Writing |
CONFERENCE PAPER |
Wear and Tool Life Characteristics when Machining Aerospace Materials |
16/02/2009 |
100% for Research and Paper Writing |
JOURNAL |
An Experimental Investigation Into the Effect of Minimum Quality Lubricant on Cutting Temperature for Machinability of AISI 9310 Steel Alloy |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Analysis of Laser-Micromachining for Silicon MEMS Components |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Assessment of Surface Treatment on Fatigue Life of Cylinder Block for Linear Engine using Frequency Response Approced |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Cutting Force and Chips Texture When Milling Hastelloy C-22HS |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Durability Assessment of Cylinder Block for Two Stroke Free Piston Linear Engine using Random Loading |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Education Reform Model at Faculty of Mechanical Engineering UMP |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Effect of Milling Parameter on Frictions when Milling Hastelloy C-22HS : A FEM and Statistical Method |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure based on FEA Approach |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Fatigue Life Prediction of Lower Suspension Arm Using Strain-Life Approach |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Finite Element Analysis and Statistical Method to Determine Temperature Distribution on Cutting Tool in End-Milling |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Fourth Order Torque Prediction Model in End Milling |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Multiaxial Fatigue Behaviour of Cylinder Head for a Free Piston Linear Engine |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Optimization of Cutting Force and Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) using Response Surface Method and Radian Basis Function Network |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Prediction of End-of-Life Strategies for Household Equipment using Artificial Intelligent |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Study of Air Fuel Ratio on Engine Performance of Direct Injection Hydrogen Fuelled Engine |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
Surface Roughness Prediction Model of 6061-T6 Aluminium Alloy Machining using Statistical Method |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
The Effect of the Foundation Subject to the Final Year Subject |
01/01/2009 |
100% for Research and Paper Writing |
JOURNAL |
An Investigation into the Effects of Spot Diameter and Sheet Thickness on Fatigue Life of Spot Welded Structure Based on FEA |
01/01/2008 |
100% for Research and Paper Writing |
JOURNAL |
Cutting Force Prediction Model by FEA and RSM when Machining Hastelloy C-22HS with 90 holder |
01/01/2008 |
100% for Research and Paper Writing |
JOURNAL |
Fatigue Life Prediction of Spot Welded Structures : A Finite Element Analysis Approach |
01/01/2008 |
100% for Research and Paper Writing |
JOURNAL |
Finite Element Based Fatigue Life Prediction of Cylinder Head for Two-Stroke Linear Engine using Stress-Life Approach |
01/01/2008 |
100% for Research and Paper Writing |
JOURNAL |
Finite Element Based Fatigue Life Prediction of a New Free Piston Engine Mounting |
01/01/2008 |
100% for Research and Paper Writing |
JOURNAL |
Prediction of Tool Life by Statistic Method in End-Milling Operation |
01/01/2008 |
100% for Research and Paper Writing |
EDITORIAL ACTIVITITIES |
JOURNAL |
Vol. 11 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/06/2015 |
Editor in Chief for IJAME (Scopus Indexed) |
JOURNAL |
Vol. 12 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/12/2015 |
Editor in Chief for IJAME (Scopus Indexed) |
JOURNAL |
Vol. 8 - Journal of Mechanical Engineering & Sciences (JMES) |
01/06/2015 |
Managing Editor for JMES (Scopus Indexed) |
JOURNAL |
Vol. 9 - Journal of Mechanical Engineering & Sciences (JMES) |
01/12/2015 |
Managing Editor for JMES (Scopus Indexed) |
JOURNAL |
Vol. 10 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/12/2014 |
Editor in Chief for IJAME (Scopus Indexed) |
JOURNAL |
Vol. 9 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/06/2014 |
Editor in Chief for IJAME (Scopus Indexed) |
JOURNAL |
Vol. 7 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/06/2013 |
Editor in Chief for IJAME (Scopus Indexed) |
JOURNAL |
Vol. 8 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/12/2013 |
Editor in Chief for IJAME (Scopus Indexed) |
JOURNAL |
Vol. 5 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/06/2012 |
Editor in Chief for IJAME (Scopus Indexed) |
JOURNAL |
Vol. 6 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/12/2012 |
Editor in Chief for IJAME (Scopus Indexed) |
JOURNAL |
Vol. 3 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/06/2011 |
Editor in Chief for IJAME (Scopus Indexed) |
JOURNAL |
Vol. 4 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/12/2011 |
Editor in Chief for IJAME (Scopus Indexed) |
JOURNAL |
Vol. 1 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/06/2010 |
Editor in Chief for IJAME (Scopus Indexed) |
JOURNAL |
Vol. 2 - International Journal of Automotive and Mechanical Engineering (IJAME) |
01/12/2010 |
Editor in Chief for IJAME (Scopus Indexed) |