ACADEMIC STAFF
+  Fakulti Kejuruteraan Kimia & Sumber Asli (106)
+  Fakulti Kejuruteraan Awam & Sumber Alam (57)
+  Fakulti Kejuruteraan Elektrik & Elektronik (85)
+  Fakulti Sistem Komputer & Kejuruteraan Perisian (82)
+  Fakulti Kejuruteraan Mekanikal (95)
+  Fakulti Sains & Teknologi Industri (97)
+  Fakulti Kejuruteraan Pembuatan (57)
+  Fakulti Teknologi Kejuruteraan (63)
+  Fakulti Pengurusan Industri (53)
+  Pusat Bahasa Moden & Sains Kemanusiaan (99)
 

Search by Name Expertise

Home> FKM1000-FAKULTI KEJURUTERAAN MEKANIKAL

PROFESOR MADYA DR. KUMARAN A/L KADIRGAMA

Contact No. : 094246232
Gender : MALE
Nationality : MALAYSIA
Current Positon : DS54-A-PROFESOR MADYA
E-Mail : kumaran@ump.edu.my
 
ACADEMIC QUALIFICATION
. 2011 : IJAZAH KEDOKTORAN (DOCTORAL DEGREE), UNIVERSITI TENAGA NASIONAL (UNITEN)
. 2011 : IJAZAH KEDOKTORAN (DOCTORAL DEGREE), UNIVERSITI TENAGA NASIONAL (UNITEN)
. 2005 : IJAZAH SARJANA (MASTERS DEGREE), UNIVERSITI TENAGA NASIONAL (UNITEN)
. 2003 : IJAZAH SARJANA MUDA (BACHELOR DEGREE), UNIVERSITI TENAGA NASIONAL (UNITEN)
. 1998 : SPM, SEKOLAH KEBANGSAAN SERI MAHKOTA
. 1996 : SRP, SEKOLAH KEBANGSAAN SERI MAHKOTA
 
EXPERTISE
EXPERT AREA MAJOR YEARS OF EXPERTISE LEVEL
ADVANCED MANUFACTURING PROCESS, RENEWABLE ENERGY, NANOFLUID NANOFLUID, HEAT TRANSFER, MACHINING
12
SANGAT TINGGI
BIOTECHNOLOGY NANO TECHNOLOGY
6
SANGAT TINGGI
QUALITY ASSURANCE STATISTICAL,MANUFACTURING
5
SANGAT TINGGI
SMART SYSTEM NANO LUBRICANT
5
SANGAT TINGGI
 
EMPLOYMENT HISTORY
EMPLOYER POST JOIN DATE RESIGN DATE STATUS
Pahang Cement Sdn.Bhd ENGINEER 01/07/2003 01/12/2003 TETAP
Maruwa Sdn.Bhd ENGINEER/ HEAD OF DEPARTMENT 05/02/2004 05/02/2005 TETAP
Uniten RESEARCH ASST 05/02/2005 31/12/2007 KONTRAK
   
RESEARCH
NO. TITLE ROLE START DATE END DATE STATUS
1. INVESTIGATION OF THE INFLUENCE OF SYNTHESIS PARAMETER ON TEMPLATE BASED ELECTRODEPOSITED COBALT NANOWIRES Member 05-APR-2018 04-APR-2020 Sedang Berjalan
2. IONIZATION PROBE DEVELOPMENT FOR GASEOUS FUEL ENGINE COMBUSTION ANALYSIS Member 01-APR-2018 31-MAR-2020 Sedang Berjalan
3. Fundamental study of hybrid graphene oxide and nanofibrillated cellulose for aircraft wings application Leader 15-AUG-2017 14-AUG-2019 Sedang Berjalan
4. Sustainable Green Machining By Nanoparticles Suspended Coolant Member 28-JUN-2017 27-JUN-2019 Sedang Berjalan
5. SYNTHESIS OF SILVER NANOWIRES HYBRID THIN FILM FOR ADVANCED AUTOMOTIVE APPLICATION Member 20-JUN-2017 19-JUN-2019 Sedang Berjalan
6. DEVELOPMENT OF NICKEL-BASED NANOPOL YMER FOR AUTOMOTIVE DASHBOARD Member 20-JUN-2017 19-JUN-2019 Sedang Berjalan
7. DEVELOPMENT OF GRAPHENE-CNT COOLANT TO ENHANCE END MILLING MACHINING PERFORMANCE Member 20-JUN-2017 19-JUN-2019 Sedang Berjalan
8. Synthesis and Characterization of One Dimensional Modified Cobalt Nanowires for Nanoscale Mechanical Devices Member 01-AUG-2016 31-JUL-2018 Sedang Berjalan
9. Fundamental Study of Nano-Diesel Blend Fuels in Ultra-low Emission Homogeneous Charge Compression Ignition Engine Member 01-AUG-2016 31-JUL-2018 Sedang Berjalan
10. Nano-Structured Diamond and Silica Coatings on Co-Cr-Mr Substrate for Biomedical Applications Leader 19-JUN-2016 19-FEB-2018 Tamat
11. DIRECT METAL LASER SINTERING TECHNOLOGY FOR THE MANUFACTURE OF FULLY POROUS FUNCTIONALLY GRADED TITANIUM ALLOY FEMORAL STEMS (FABRICATION AND DESIGNING OF FULLY POROUS FUNCTIONALLY GRADED TITANIUM ALLOY FEMORAL STEMS) Leader 01-JUN-2016 01-JUN-2019 Sedang Berjalan
12. SMART CELLULOSE FIBERS COATED WITH CARBON NANOTUBE NETWORKS FOR AUTOMOTIVE COOLING SYSTEM Member 25-MAY-2016 24-MAY-2018 Tamat
13. INVESTIGATION OF DISPERSION, STABILITY, AND TRIBOLOGICAL PERFORMANCE OF OIL-BASED GRAPHENE AND COPPER NANOFLUIDS Member 25-MAY-2016 24-MAY-2018 Tamat
14. Investigation of the influence of synthesis parameter on template based electrodeposited Ni nanowires Member 25-MAY-2016 24-MAY-2018 Tamat
15. Characteristics Study of Co-30Cr-7Mo Dental Alloys Using Direct Metal Laser Melting process Member 25-MAY-2016 24-MAY-2018 Tamat
16. Environmental Friendly Sustainable Biofuel for Diesel Engine using Algae Member 10-MAY-2016 09-MAY-2018 Selesai (Tutup Projek)
17. An Experimental Analysis of a HCCI Diesel FUEL Engine Using Copper Nanoparticles Blended Diesel Fuel Member 05-MAY-2016 04-MAY-2018 Tamat
18. Investigate the effect of Nanolubricant for Enhancing the Vehicle Air-Conditioning Efficiency Leader 05-APR-2016 04-APR-2018 Tamat
19. Investigation of The Rigidity of CoCrMo Cellular Structure Fabricated by Selective Laser Melting Process for Potential Dental Applications Member 01-JAN-2016 31-DEC-2018 Sedang Berjalan
20. Thermal Management of Vehicle Radiator by Nanofluids Leader 01-JAN-2016 31-DEC-2018 Sedang Berjalan
21. Biodiesel-diesel (up to 45%) Fuel Characteristics on Homogeneous Charge compression Ignition Engine Member 15-DEC-2015 14-DEC-2017 Tamat
22. Hydroxyapatite Coating on Laser Melted-CoCrMo Compact using various thicknesses of oxide interlayers for Biomedical Applications Member 01-DEC-2015 30-NOV-2017 Selesai
23. Tribological Behavior of Journal Bearing Material under Nano Carbon Tube Member 01-OCT-2015 30-SEP-2017 Tamat
24. Progressive Wear in Sustainable Machining of Cobalt Chromium Alloy using Cutting Inserts of Different Coating Materials Member 25-JUN-2015 24-JUN-2017 Tamat
25. An Auto-Ignition Study in Engine using HCCI and Carbon Nanotubes Member 25-JUN-2015 24-JUN-2017 Tamat
26. Tribological Behaviour of Waste Cooing Oil As Biolubricant for Internal combustion Engine Leader 15-MAR-2015 14-MAR-2017 Tamat
27. Influence of Waste Cooking Oil as Bio-Nanlubricant on Wear and Friction Behaviour of Aluminium Against Stainless Steel Leader 15-MAR-2015 14-MAR-2017 Tamat
28. Hybrid Nanoparticles with Ethylene Glycol for Car Radiator Application Leader 25-NOV-2014 24-NOV-2016 Selesai (Tutup Projek)
29. Impact Biodiesel Fuel Characteristics on Ultra-Low Emission Homogeneous Charge Compression Ignition Engine Member 15-NOV-2014 14-NOV-2016 Tamat
30. Valve Wear Analysis with Nano Coating for Compressed Natural Gas (CNG) Engine Member 15-NOV-2014 14-NOV-2016 Selesai (Tutup Projek)
31. Fundamental Study of Thermo-Physical Properties and Forced Convection Heat Transfer Rate Bioglycol Based Nanofluids Coolant Member 25-OCT-2014 24-OCT-2016 Selesai (Tutup Projek)
32. Enhanced Driver Seating Comfort In A Small Size Car Through Digital Human Modelling(DHM)And Pressure Mapping Method Member 01-JUL-2014 30-JUN-2017 Selesai (Tutup Projek)
33. Engine Valve Seat wear study on Compressed Natural Gas (CNG)by using Nano Powder Member 01-JUL-2014 30-JUN-2017 Selesai (Tutup Projek)
34. Multiaxial Modelling of Lightweight Sandwich Structures based on Corrugated-cores for Aerospace Application Member 01-JUL-2014 30-JUN-2017 Selesai (Tutup Projek)
35. Development of a Smart Cutting Tool for Sustainable Machining of Nickel Based Alloys for the Application to Turbocharger Manufacturing Member 05-JUN-2014 04-JUN-2016 Selesai (Tutup Projek)
36. Development an Olympic Scale of Recurve Bow and Archery For Local Junior Athletes Under 15 and 17 (U-15 and U-17) Member 02-JUN-2014 01-JUN-2016 Selesai (Tutup Projek)
37. Development of Titanium Manganese Alloys Foams for Biomedical Applications by Metal Injection Molding Member 25-APR-2014 24-APR-2016 Selesai (Tutup Projek)
38. Synthesis and Characterizing of Green Machining using Tio2 Based Nanocoolant Leader 25-FEB-2014 24-FEB-2016 Tamat
39. Development of Multiaxial Fatigue Modelling for Lightweight Automotive Suspension Components Member 25-DEC-2013 24-DEC-2015 Tamat
40. A Low Cost Force Dynamometer for Precison Machining of Automotive Cylinder Head Member 25-DEC-2013 24-DEC-2015 Selesai (Tutup Projek)
41. Three-Dimensional (3D) Modelling of Human Airway using Fluid Structure Interaction (FSI) Technique Member 01-DEC-2013 30-NOV-2015 Selesai (Tutup Projek)
42. Concentrating Solar Thermal-Powered Biomass Syngas Modelling Process for Green Electricity Conversion Member 01-DEC-2013 30-NOV-2016 Selesai (Tutup Projek)
43. Development and Characteristics of Waste Cooking Oil as Bio -lubricant and Nano-Lubricant at High Temperature Leader 01-DEC-2013 30-NOV-2015 Selesai (Tutup Projek)
44. Multiaxial Fatigue Modelling for Safety-critical Lightweight Automotive Suspension Components Member 01-DEC-2013 30-NOV-2016 Selesai (Tutup Projek)
45. Modelling of Vehicle Seat for Human Comfort of a Small Size Passenger Car (K-Car) Member 01-DEC-2013 30-NOV-2015 Selesai (Tutup Projek)
46. Fundamental Study Of Jatropha Biodiesel Oil On Ultra-Low Emission Homogeneous Charge Compression Ignition Engine Combustion Member 01-DEC-2013 30-NOV-2016 Selesai (Tutup Projek)
47. The Effect of Steam Injection on Power and Emission of Hybrid Air-Diesel Engine Using Steam Injector Member 01-DEC-2013 30-NOV-2016 Selesai (Tutup Projek)
48. Development and Analysis of Bow and Arrow for Malaysian Athlete Member 01-DEC-2013 30-NOV-2015 Selesai (Tutup Projek)
49. Characteristiction of Engine Oil with Nano Particle as an Additives Leader 25-NOV-2013 24-NOV-2015 Selesai (Tutup Projek)
50. Fundamental Study of EG Based Nanofluids for Application in Automotive cooling System Member 25-NOV-2013 24-NOV-2015 Selesai (Tutup Projek)
51. Water Based Nano Coolants Leader 15-OCT-2013 14-OCT-2014 Selesai (Tutup Projek)
52. Nano Particle's Heat Transfer Characteristics in Refrigeration and Automotive Airi Conditioning Systems for Reductiion ofo Energy Consumption Member 15-DEC-2012 14-DEC-2014 Selesai
53. Potential of Integrated Chatter Avoidance and Minimum Quantity Lubrication Condition in Machining Process Member 01-MAY-2012 30-APR-2014 Selesai
54. Nanoparticle Based Coolants in Grinding Processes For Automotive Industry Cooling Applications Member 01-APR-2012 31-MAR-2014 Tamat
55. Development of High Performance Sports Shoes and Knee Pad for Malaysian Athletes Member 01-DEC-2011 31-MAY-2014 Selesai (Tutup Projek)
56. Development of Tool-Life Performance Model for Mold and Die Using Near Dry Machining Technique Leader 01-SEP-2011 01-SEP-2013 Tamat
57. Development of New Lubricant Dispersed with Nanoparticles Member 01-AUG-2011 01-NOV-2012 Tamat
58. Surface Impregnation/modification using Nanomaterials for Enhanced Mechanical Properties of Metal Surfaces Leader 15-JUL-2011 15-JUL-2012 Selesai (Tutup Projek)
59. Minimum Quality Lubication Technique for End Mill to Enhance Machinability of Aluminum Alloys Member 08-JUL-2011 08-JAN-2014 Selesai
60. Characterization of Heat Transfer Process for Hydrogen Fueled Internal Combustion Engine Member 15-NOV-2010 14-NOV-2011 Selesai (Tutup Projek)
61. Machining of Nickel Superalloly Material Using Nanofluid as Coolant for Light Alloy Piston Member 15-OCT-2010 14-OCT-2011 Tamat
62. Hybrid Optimization Model to Enhanced the Machinability of Titanium Alloys Member 15-SEP-2010 14-SEP-2012 Selesai
63. Modelling of Thermal Comfort and Productivity in Automative Industries Member 01-AUG-2010 31-OCT-2012 Selesai
64. Development of Online Machining Condition System: An Acoustic Emision Approached Member 01-MAY-2010 30-NOV-2011 Tamat
65. Investigating of Micromachining of silicon Using Micro EDM Member 01-DEC-2009 30-NOV-2011 Selesai (Tutup Projek)
66. Development of Revetec Engine Cam For Internal Combustion Engines Member 01-NOV-2009 31-OCT-2010 Tamat
67. An Investigation of Wind Power Potential at Kuala Pahang, Pekan. Leader 01-NOV-2009 30-NOV-2011 Tamat
68. Accuracy of Stainless Steel Thick Plates in Peripheral Machining Member 01-OCT-2009 30-SEP-2010 Tamat
69. Heat Transfer Augmentation with Aluminium Oxide Nanofluid in a Plain Tube and With Inserts Member 01-OCT-2009 30-SEP-2010 Tamat
70. A Novel and Flexible Solar Car Kit for Educational Use Member 01-AUG-2009 31-JUL-2010 Tamat
71. Investigation of Refrigerator Performance Using Experimental and Simulation Method Member 01-AUG-2009 31-JUL-2010 Tamat
72. Design and Develop Blow Mould Using Machining Optimization Parameters Leader 01-AUG-2009 31-JUL-2010 Selesai (Tutup Projek)
73. Design and Development of a Lift System for Diasable People Member 01-MAY-2009 31-OCT-2010 Tamat
74. Development of Micro-EDM with Microactuator Feed Control System Member 01-MAY-2009 30-APR-2011 Tamat
75. Development of Micropump in Fuel Cell Application Using Micro Electro-Mechanical System (MEMS) Machining Method Member 01-MAY-2009 30-APR-2011 Selesai
76. Experimental Investigation of Machining Performance of Near Dry and Powder Mixed Dielectric (PMD) Electrical Discharge Machining (EDM) on Titanium Alloys Member 01-MAY-2009 30-NOV-2010 Selesai
77. Optimization of Grinding Wheel Parameters with Intelligent Techniques Leader 05-JAN-2009 30-NOV-2011 Selesai
78. Statistical and artificial intelligent study to determine the effect of milling parameters on cutting force, stress and surface roughness when milling Aluminium and Nickel Superalloy Leader 01-AUG-2008 31-JUL-2009 Selesai
79. Development of a Design Evaluation System Software for Home Appliances Remanufacturing Leader 01-JUL-2008 31-DEC-2009 Selesai
   
PUBLICATION
TYPE PUBLICATION TARIKH PENERBITAN TYPE OF CONTRIBUTION
NON-REFEREED PUBLICATION
CONFERENCE PAPER INVESTIGATING THE AIMING AND SHOOTING POINT OF THE JUNIOR ARCHERS 02/02/2014 100 and research
REFEREED PUBLICATION
JOURNAL Assessment of alternative methods of preparing internal combustion engine cylinder bore surfaces for frictional improvement 02/05/2017 100%
JOURNAL Engine performance, exhaust emission and combustion analysis of a 4-stroke spark ignited engine using dual fuel injection 01/06/2017 80
JOURNAL Experiments on Dissimilar Valve Lift (DVL) for Turbulence Increment on a Bi-Fuel Compressed Natural Gas (CNG) Engine 30/01/2017 100
JOURNAL Investigation on effective thermal conductivity and relative viscosity of cellulose nanocrystal as a nanofluidic thermal transport through a combined experimental–Statistical approach by using Response Surface Methodology 02/05/2017 60
JOURNAL Waste cooking oil blended with the engine oil for reduction of friction and wear on piston skirt 01/10/2017 100%
JOURNAL Effect of Dissimilar Valve Lift on a Bi-Fuel CNG Engine Operation 01/07/2016 100
JOURNAL Methods of preparing internal combustion engine cylinder bore surfaces for frictional improvement. 20/12/2016 Masters student
JOURNAL The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil 29/10/2015 Funding and expertise
JOURNAL A review of forced convection heat transfer enhancement and hydrodynamic characteristics of a nanofluid 01/01/2014 PhD student
JOURNAL BIOMECHANICS MEASUREMENTS IN ARCHERY 01/07/2014 100 peratus & Penulis utama
JOURNAL Mass Fraction Burn Comparison Of Compressed Natural Gas And Gasoline 01/04/2014 100
JOURNAL DEVELOPMENT OF TEMPERATURE STATISTICAL MODEL WHEN MACHINING OF AEROSPACE ALLOY MATERIALS 15/10/2013 Research
JOURNAL Study of forced convection nanofluid heat transfer in the automotive cooling system 11/12/2013 PhD student
JOURNAL The effect of cross sectional area of tube on friction factor and heat transfer nanofluid turbulent flow 03/07/2013 PhD student
JOURNAL The effect of nanofluid volume concentration on heat transfer and friction factor inside a horizontal tube 16/09/2013 PhD student
JOURNAL Thermal comfort findings: Scenario at Malaysian automotive industry 17/09/2013 tulis bersama
   

For best view, please use Mozilla Firefox, Internet Explorer 7.0 or above with resolution 1024 x 768 pixel.

Copyright 2011 Universiti Malaysia Pahang