|
|
|
Home>
FKM1000-FAKULTI TEKNOLOGI KEJURUTERAAN MEKANIKAL DAN AUTOMOTIF
PROFESOR TS. DR. MD. MUSTAFIZUR RAHMAN
|
| Contact No. |
: |
094245027 |
| Gender |
: |
MALE |
| Nationality |
: |
BANGLADESH |
| Current Positon |
: |
VK7-A-PROFESOR |
| E-Mail |
: |
mrahman@ump.edu.my |
|
| |
ACADEMIC QUALIFICATION |
| . 2007 |
: IJAZAH KEDOKTORAN (DOCTORAL DEGREE), UNIVERSITI KEBANGSAAN MALAYSIA, BANGI
|
| . 1996 |
: IJAZAH SARJANA (MASTERS DEGREE), Bangladesh University of Engineering and Technology (BUET), Dhaka
|
| . 1993 |
: IJAZAH SARJANA MUDA (BACHELOR DEGREE), UNIVERSITY OF ENG., DACCA, BANGLADESH
|
|
| |
EXPERTISE |
| EXPERT AREA |
MAJOR |
YEARS OF EXPERTISE |
LEVEL |
| ADVANCED MATERIALS-COMPOSITE SPECIAL ALLOYS |
HARD MATERIALS ALLOYS MACHINING |
10 |
SANGAT TINGGI |
| ARTIFICIAL INTELLIGENCE |
DESIGN AND ANALYSIS |
12 |
SANGAT TINGGI |
| ARTIFICIAL INTELLIGENCE |
EXPERIMENTAL AND COMPUTATIONAL MODELING |
5 |
TINGGI |
| ARTIFICIAL INTELLIGENCE |
COMPUTATIONAL MODELING AND ANALYSIS |
19 |
SANGAT TINGGI |
| ARTIFICIAL INTELLIGENCE |
MODELING AND OPTIMIZATION |
10 |
TINGGI |
| ARTIFICIAL INTELLIGENCE |
MODELING AND DESIGN |
17 |
SANGAT TINGGI |
| AUTOMOTIVE DESIGN |
FATIGUE AND FRACTURE |
11 |
SANGAT TINGGI |
| BIOFUEL AND BIOGAS |
HCCI ENGINE, DIESEL ENGINE SI ENGINE |
6 |
TINGGI |
| BIOTECHNOLOGY |
NANO PARTICLE IN COOLING AND LUBRICATING APPLICATION |
4 |
TINGGI |
| CAD/CAM/CAE APPLICATIONS |
FINITE ELEMENT MODELING AND ANALYSIS |
12 |
SANGAT TINGGI |
| COMBUSTION AND FUELS |
HYDROGEN FUEL, ALTERNATIVE FUELS |
7 |
SANGAT TINGGI |
| COMPUTATIONAL FLUID DYNAMICS |
MODELING AND ANALYSIS |
12 |
TINGGI |
| HEAT AND MASS TRANSFER OPERATIONS |
HEAT EXCHANGER |
10 |
TINGGI |
| MACHINING/RAPID PROTOTYPING AND TOOLING (INCLUDING STANDARD SUPPORTING TECHNOLOGIES OF PRECISION MACHINING AND MICRO MACHINING) |
ADVANCED MATERIALS PROCESSING |
10 |
SANGAT TINGGI |
| MATERIAL PROCESSING TECHNOLOGY |
ADVANCED MATERIALS PROCESSING |
14 |
SANGAT TINGGI |
| MATERIALS PERFORMANCE AND PROCESSES ANALYSIS |
MANUFACTURING |
13 |
SANGAT TINGGI |
| SOFTWARE ENGINEERING |
ALTERNATIVE FUELS |
6 |
SANGAT TINGGI |
|
| |
EMPLOYMENT HISTORY |
| EMPLOYER |
POST |
JOIN DATE |
RESIGN DATE |
STATUS |
| Khulna University Of Engineering And Technology, Bangladesh |
LECTURER |
25/05/1996 |
08/02/1998 |
TETAP |
| Shahjalal University Of Science And Technology, Bangladesh |
ASSISTANT PROFESSOR |
01/03/1998 |
14/02/2007 |
TETAP |
| Universiti Kebangsaan Malaysia |
RESEARCH ASSISTANT |
02/05/2003 |
16/04/2007 |
KONTRAK |
| Shahjalal University Of Science And Technology, Bangladesh |
ASSOCIATE PROFESSOR |
15/02/2007 |
29/05/2009 |
TETAP |
| Universiti Malaysia Pahang, Kuantan, Malaysia |
VISITING LECTURER |
19/04/2007 |
22/11/2007 |
KONTRAK |
| Universiti Malaysia Pahang |
SENIOR LECTURER |
23/11/2007 |
17/05/2009 |
KONTRAK |
| Universiti Malaysia Pahang |
ASSOCAITE PROFESSOR |
18/05/2009 |
29/05/2009 |
KONTRAK |
| Universiti Malaysia Pahang |
PROFESSOR |
23/08/2013 |
22/08/2022 |
KONTRAK |
|
| |
|
RESEARCH |
| NO. |
TITLE |
ROLE |
START DATE |
END DATE |
STATUS |
| 1. |
INVESTIGATION OF BIODIESEL MIXTURE WITH OXYGENATED BIO BASED FUEL IN A COMPRESSION IGNITION ENGINE |
Member |
25-DEC-2023 |
24-DEC-2025 |
Sedang Berjalan |
| 2. |
A NEW FORMULATION OF A MODIFIED HYBRID MODEL FOR UNCERTAINTY QUANTIFICATION FOR MULTI-CRACK GROWTH UNDER CYCLIC LOADING |
Member |
01-OCT-2023 |
30-SEP-2026 |
Sedang Berjalan |
| 3. |
FORMULATION OF TERNARY RGO/MIXED TRANSITION METAL OXIDE (NICO2O4/MNCO2O4)-BASED CARBON FABRIC FOR HIGH-PERFORMANCE ALL-SOLID-STATE SUPERCAPACITORS IN ELECTRIC VEHICLES |
Leader |
01-OCT-2023 |
30-SEP-2026 |
Sedang Berjalan |
| 4. |
BALLISTIC IMPACT MODELLING OF TRUSS-CORE SANDWICH STRUCTURE INCORPORATING CARBON FIBER REINFORCED PLASTIC COMPOSITE AND LIGHTWEIGHT ALUMINUM ALLOY |
Member |
01-OCT-2023 |
30-SEP-2026 |
Sedang Berjalan |
| 5. |
COBALT OXIDE BASED NANO-ENHANCED PHASE CHANGE MATERIAL AS POTENTIAL MATERIAL FOR THERMAL MANAGEMENT SYSTEM |
Member |
01-JUL-2023 |
30-JUN-2025 |
Sedang Berjalan |
| 6. |
DECISION-MODEL DEVELOPMENT FOR VEHICLE HEALTH MONITORING USING MACHINE-LEARNING APPROACH |
Leader |
01-DEC-2022 |
30-NOV-2024 |
Sedang Berjalan |
| 7. |
INVESTIGATE OF GRAPHENE/MWCNT HYBRID NANO-COOLANTS
ON WEAR AND SURFACE INTEGRITY DURING ENVIRONMENTALFRIENDLY
MACHINING |
Member |
15-NOV-2022 |
14-NOV-2024 |
Sedang Berjalan |
| 8. |
AN OPTIMIZED-DECISION-MODEL EXPLOITING DEEP-LEARNING ENABLED VULNERABLE POINT CLASSIFICATION FOR VEHICULAR HEALTH MONITORING SYSTEM |
Member |
01-SEP-2022 |
31-AUG-2024 |
Sedang Berjalan |
| 9. |
FORMULATION OF MACHINE LEARNING MODEL FOR MECHANICAL PROPERTIES PREDICTION OF 3D PRINTED PARTS |
Member |
15-JUL-2022 |
14-JUL-2024 |
Sedang Berjalan |
| 10. |
FORMULATION OF HYBRID NANO-COOLANT TO INVESTIGATE TOOL WEAR MECHANISM THROUGH SUSTAINABLE END MILLING MACHINING PROCESS OF ALUMINIUM ALLOY AA6061-T6 |
Leader |
01-APR-2022 |
31-MAR-2024 |
Sedang Berjalan |
| 11. |
Nanoenhanced Phase Change Materials for smart energy storage and management in buildings |
Member |
20-DEC-2021 |
19-DEC-2023 |
Tamat (Perlu hantar laporan akhir) |
| 12. |
MXENE NANOMATERIAL AS AN ALTERNATIVE MATERIAL FOR AUTOMOTIVE COOLING SYSTEM |
Member |
13-OCT-2021 |
12-OCT-2023 |
Tamat (Laporan akhir dalam semakan) |
| 13. |
THE INVESTIGATION ON THE EFFECT OF NOZZLE DISTANCE ON MINIMUM QUANTITY LUBRICANT MACHINING OF HASTELLOY C22 NICKEL BASED ALLOY |
Member |
01-OCT-2021 |
30-SEP-2023 |
Tamat (Perlu hantar laporan akhir) |
| 14. |
CRYSTALLINE SURFACE MODIFICATION EVALUATION OF SALT HYDRATE PHASE CHANGE MATERIAL FOR IMPROVED THERMAL & CHEMICAL STABILITY UTILIZING NANOPARTICLES AND NUCLEATION AGENT |
Member |
07-SEP-2021 |
06-SEP-2024 |
Sedang Berjalan |
| 15. |
ELUCIDATION OF THE DUST CONCENTRATION, MINIMUM IGNITION ENERGY AND TURBULENCE LEVEL TOWARDS REVERSAL FLOW AND UNCONTROLLED RE-IGNITION MECHANISM IN A VENTED RICE DUST EXPLOSION |
Member |
07-SEP-2021 |
06-SEP-2023 |
Tamat (Perlu hantar laporan akhir) |
| 16. |
EVALUATION OF PANI BASED HYBRID POLYMER TO ENHANCE WEARABLE FUNCTIONAL PROPERTIES OF TEXTILE MATERIAL |
Leader |
01-JUN-2021 |
31-MAY-2023 |
Tamat (Perlu hantar laporan akhir) |
| 17. |
DEVELOPMENT OF AN EFFICIENT MODEL EXPLOITING VULNERABLE POINTS FOR VEHICLE HEALTH MONITORING |
Leader |
26-JUN-2020 |
25-JUN-2022 |
Selesai (Mencapai Semua KPI) |
| 18. |
LACK OF FUSION AND CRACK GROWTH BEHAVIOUR ASSESSMENT FOR ADDITIVELY MANUFACTURED TI-6AL-4V ALLOY USING SELECTIVE LASER MELTING |
Member |
15-DEC-2019 |
14-MAR-2022 |
Tamat (Laporan akhir dikembalikan dan perlu dihantar semula) |
| 19. |
Development of a Minimum Quantity Lubrication System for Sustainable End Milling Machining Process |
Leader |
01-DEC-2019 |
31-AUG-2022 |
Selesai (Mencapai Semua KPI) |
| 20. |
CAM PROFILE DESIGN OPTIMIZATION FOR DIRECT ACTUATION OF A FLEXIBLE VALVE TIMING INTERNAL COMBUSTION ENGINE |
Member |
15-NOV-2019 |
14-FEB-2022 |
Selesai (Tidak Mencapai KPI) |
| 21. |
Investigate the effect of nanoparticle as lubricant additive on the tribological mechanism. |
Member |
01-NOV-2019 |
31-JAN-2022 |
Tamat (Perlu hantar laporan akhir) |
| 22. |
THE WEAR RATE REDUTION MECHANISM OF MINIMUM QUALITY LUBRICATION TO ENCHANE MACHINABILITY USING HYBRID NANO-COOLANT |
Leader |
15-OCT-2019 |
14-OCT-2021 |
Selesai (Mencapai Semua KPI) |
| 23. |
PERFORMANCE OF HYBRID TIO2/CNT NANOFLUID FOR MINIMAL QUANTITY LUBRICATION IN TURNING PROCESS |
Leader |
15-OCT-2019 |
14-OCT-2022 |
Tamat (Perlu hantar laporan akhir) |
| 24. |
A MACHINE LEARNING BASED RELEVANT RESEARCHER RECOMMENDATION FOR UMP GRANT APPLICATION EVALUATION AND POSSIBLE COLLABORATOR IDENTIFICATION |
Leader |
01-SEP-2019 |
30-NOV-2022 |
Tamat (Perlu hantar laporan akhir) |
| 25. |
Interaction mechanism of crack growth and lack of fusion for additively manufactured of Ti-6Al-4V alloy using selective laser melting |
Member |
01-SEP-2019 |
31-MAY-2023 |
Tamat (Laporan akhir dalam semakan) |
| 26. |
IoT ENABLED INTRA-VEHICULAR WIRELESS COMMUNICATION FOR VEHICLE MONITORING SYSTEM |
Leader |
01-SEP-2019 |
30-NOV-2021 |
Selesai (Mencapai Sebahagian KPI) |
| 27. |
IOT ENABLED INTRA-VEHICULAR WIRELESS COMMUNICATION FOR VEHICLE MONITORING SYSTEM |
Leader |
01-SEP-2019 |
30-NOV-2021 |
Selesai (Mencapai Sebahagian KPI) |
| 28. |
Formulate the nozzle spray modelling of the supercritical carbon dioxide flow pattern in machining Nickel-Based superalloy |
Member |
01-SEP-2019 |
31-MAY-2022 |
Selesai (Tidak Mencapai KPI) |
| 29. |
Formulating a multi-objective optimization control model of hybrid vehicles to enhance fuel economy using combustion and regenerative brake power |
Leader |
01-SEP-2019 |
31-MAY-2022 |
Selesai (Tidak Mencapai KPI) |
| 30. |
Elucidate the Mechanism of Stress Corrosion Cracking Behaviour during Waterjet Peening of Metallic Alloys |
Member |
01-SEP-2019 |
31-MAY-2022 |
Selesai (Tidak Mencapai KPI) |
| 31. |
Formulation of new ionic liquid-modified biolubricants to enhance machining performance when cutting AISI 316L stainless steel using MQL cutting conditions |
Member |
01-SEP-2019 |
31-MAY-2022 |
Selesai (Tidak Mencapai KPI) |
| 32. |
Formulation of a titanium carbide/MXene (Ti3C2Tx) nanomaterial optical property model for potential heat transfer liquid |
Member |
01-SEP-2019 |
31-MAY-2022 |
Selesai (Tidak Mencapai KPI) |
| 33. |
FORMULATION OF A NEW FATIGUE RELIABILITY CRITERION OF FATIGUE CRACK GROWTH COMPUTATION FOR METALLIC ADDITIVE MANUFACTURING ALSI10MG MATERIALS |
Member |
01-SEP-2019 |
31-MAY-2022 |
Selesai (Tidak Mencapai KPI) |
| 34. |
Ballistic-Resistance Modelling of Contoured-core Sandwich Structure of Carbon Fibre Reinforced Plastic and Self-Reinforced Polypropylene Composites |
Member |
01-SEP-2019 |
31-MAY-2023 |
Selesai (Tidak Mencapai KPI) |
| 35. |
IOT ENABLED ENGLISH LANGUAGE LEARNING SYSTEM FOR EARLY CHILDHOOD EDUCATION |
Member |
01-SEP-2019 |
30-NOV-2021 |
Tamat (Perlu hantar laporan akhir) |
| 36. |
IoT ENABLED ENGLISH LANGUAGE LEARNING SYSTEM FOR EARLY CHILDHOOD EDUCATION |
Member |
01-SEP-2019 |
30-NOV-2021 |
Tamat (Perlu hantar laporan akhir) |
| 37. |
CHARACTERIZING OF MXENE FOR SOLAR APPLICATION |
Member |
01-SEP-2019 |
30-NOV-2022 |
Tamat (Perlu hantar laporan akhir) |
| 38. |
ADVANCED RADIATOR TEST RIG FOR SCALING IN AUTOMOTIVE APPLICATION |
Member |
01-SEP-2019 |
30-NOV-2022 |
Tamat (Perlu hantar laporan akhir) |
| 39. |
DEVELOP AN AUTOMATED HEALTH MONITORING SYSTEM EXPLOITING THE VEHICLE STRUCTURAL DATA |
Leader |
01-SEP-2019 |
30-NOV-2022 |
Tamat (Perlu hantar laporan akhir) |
| 40. |
DESIGN AND MODIFICATION OF FDM BASED 3D PRINTER FOR EHANCED PRINTED MATERIAL PROPERTIES. |
Member |
01-SEP-2019 |
30-NOV-2022 |
Tamat (Perlu hantar laporan akhir) |
| 41. |
Development of Cardio-Vascular Simulator (CardioVASS) Device on Angiographic Images for Cardiology Trainee |
Member |
01-AUG-2019 |
30-APR-2022 |
Selesai (Mencapai Semua KPI) |
| 42. |
LACK OF FUSION AND CRACK GROWTH BEHAVIOUR ASSESSMENT FOR ADDITIVELY MANUFACTURED GLASS-FILLED POLYAMIDE 12 USING SELECTIVE LASER SINTERING |
Member |
25-JUN-2019 |
24-SEP-2021 |
Tamat (Laporan akhir dikembalikan dan perlu dihantar semula) |
| 43. |
ELUCIDATE THE WEAR RATE REDUCTION MECHANISM OF MINIMUM QUANTITY LUBRICATION TO ENHANCE MACHINABILITY USING HYBRID NANOCOOLANT |
Leader |
25-JUN-2019 |
24-SEP-2021 |
Selesai (Mencapai Semua KPI) |
| 44. |
IMPROVEMENT OF KEROPOK PRODUCTION VOLUME IN SMALL MEDIUM ENTERPRISE THROUGH DESIGN AND FABRICATION OF HIGHER CAPACITY KEROPOK KNEADING MACHINE (UIC190816) |
Member |
20-MAY-2019 |
17-NOV-2021 |
Tamat (Laporan akhir dikembalikan dan perlu dihantar semula) |
| 45. |
IMPROVEMENT OF KEROPOK PRODUCTION VOLUME IN SMALL MEDIUM ENTERPRISE THROUGH DESIGN AND FABRICATION OF HIGHER CAPACITY KEROPOK KNEADING MACHINE (RDU192808) |
Member |
20-MAY-2019 |
17-NOV-2021 |
Tamat (Laporan akhir dikembalikan dan perlu dihantar semula) |
| 46. |
INVESTIGATION OF PHYSIO-THERMAL PROPERTIES OF HYBRID GRAPHENE OXIDE AND NANOFIBRILLATED CELLULOSE FOR AUTOMOTIVE APPLICATION. |
Member |
01-APR-2019 |
30-JUN-2021 |
Selesai (Mencapai Semua KPI) |
| 47. |
PERFORMANCE EVALUATION OF HIGH SPEED MACHINING IN END MILLING PROCESS ON AA6061-T6 ITILIZING TRI-HYBRID NANOFLUID |
Leader |
15-MAR-2019 |
14-MAR-2022 |
Tamat (Perlu hantar laporan akhir) |
| 48. |
Optimizing 3D Printing Parameters for Improved Mechanical Behaviour of PLA using Fused Deposition Modeling (FDM) |
Member |
05-MAR-2019 |
04-JUN-2021 |
Selesai (Mencapai Semua KPI) |
| 49. |
DEVELOPMENT OF PLA-3D PRINTED STRUCTURE USING FUSED DEPOSITION METHOD
|
Member |
05-MAR-2019 |
04-JUN-2021 |
Selesai (Mencapai Semua KPI) |
| 50. |
Investigation of Effects of 3D Printing Parameters on Mechanical Properties of ABS Material Prepared using FDM |
Member |
05-MAR-2019 |
04-JUN-2021 |
Tamat (Laporan akhir dalam semakan) |
| 51. |
INVESTIGATION OF MECHANICAL PROPERTIES OF HYBRID POLY LACTIC ACID-METAL 3D PRINTED PARTS USING FUSED DEPOSITION MODELLING |
Leader |
05-MAR-2019 |
04-JUN-2021 |
Tamat (Laporan akhir dalam semakan) |
| 52. |
ROLE OF ACRYLONITRILE-BUTADIENE-STYRENE (ABS) TO DEVELOP 3D PRINTED COMPONENTS USING ADDITIVE MANUFACTURING TECHNIQUE |
Member |
05-MAR-2019 |
04-JUN-2021 |
Selesai (Mencapai Sebahagian KPI) |
| 53. |
INVESTIGATION OF MECHANICAL PROPERTIES OF HYBRID POLY LACTIC ACID-METAL 3D PRINTED PARTS USING FUSED DEPOSITION MODELLING |
Leader |
05-MAR-2019 |
04-JUN-2021 |
Selesai (Mencapai Semua KPI) |
| 54. |
FUSED DEPOSITION MODELLING TO FORMULATE PLA-METAL STRUCTURE FOR 3D-PRINTED APPLICATIONS |
Leader |
05-MAR-2019 |
04-JUN-2021 |
Selesai (Mencapai Semua KPI) |
| 55. |
Investigation on Physico-mechanical Behavior of Aluminium-Silicon Nitride Multi-layered Graded Composites |
Member |
01-JAN-2019 |
30-SEP-2021 |
Selesai (Tidak Mencapai KPI) |
| 56. |
Elucidation of the nexus between carbon fiber composition and mechanical properties of Tapioca Polylactic Acid Polymer emphasizing Fused Deposition Modelling |
Member |
01-JAN-2019 |
30-SEP-2021 |
Selesai (Tidak Mencapai KPI) |
| 57. |
Hands on Learning Experience: Interactive Teaching Aid for Hearing Impaired Special Education's Linguistic Use |
Member |
01-JAN-2019 |
30-SEP-2021 |
Selesai (Tidak Mencapai KPI) |
| 58. |
Investigation on pullout strength between different design of cannulated pedicle screw and osteoporosis bones to obtain an optimum design |
Member |
01-JAN-2019 |
30-SEP-2021 |
Selesai (Tidak Mencapai KPI) |
| 59. |
Elucidation of Graphene Nano-Particles Thermo-Physical Properties as Anti-Wear Additives in Engine Oil for Resistance of Boundary Film Lubrication |
Member |
01-JAN-2019 |
30-SEP-2021 |
Selesai (Mencapai Semua KPI) |
| 60. |
Multi-scale modelling of the fatigue fracture mechanism of graphene/epoxy nanocomposite material |
Member |
01-JAN-2019 |
30-SEP-2021 |
Selesai (Tidak Mencapai KPI) |
| 61. |
An investigation into predictive motion control in characterizing translator motion of a free-piston engine generator for stable transient operation |
Member |
01-JAN-2019 |
30-SEP-2021 |
Selesai (Mencapai Semua KPI) |
| 62. |
EXPERIMENTAL STUDIES ON THE EFFECT OF CURRENT DENSITY AND MAGNETIC FIELD ON THE GROWTH OF NI NANOWIRES DURING ELECTRODEPOSITION |
Member |
30-DEC-2018 |
29-MAR-2021 |
Selesai (Mencapai Semua KPI) |
| 63. |
Research and Product Testing for The Internet of Thing (IoT)
Enable Relay Network for Demand Based Light Intensity Controlled Highway Lighting System |
Member |
01-DEC-2018 |
30-NOV-2019 |
Selesai (Mencapai Semua KPI) |
| 64. |
CHARACTERIZATION AND EXPERIMENTAL INVESTIGATION OF TIO2 NANOCOATING FOR AUTOMOTIVE PAINTING |
Member |
25-OCT-2018 |
24-JAN-2021 |
Selesai (Mencapai Semua KPI) |
| 65. |
EFFECT OF BOOST PRESSURE ON COMBUSTION, PERFORMANCE AND EMISSIONS OF HIGH PROPORTION ALCOHOL BLEND IN GASOLINE FOR SI ENGINE |
Member |
25-SEP-2018 |
24-DEC-2020 |
Selesai (Mencapai Sebahagian KPI) |
| 66. |
INVESTIGATION ON PERFORMANCE OF DIFFERENT VEGETABLE BASED NANO-FLUID USED IN MINIMUM QUANTITY LUBRICANT (MQL) SYSTEM FOR MACHINING TI-6AL-4V TITANIUM ALLOYS |
Member |
05-SEP-2018 |
04-DEC-2020 |
Selesai (Tidak Mencapai KPI) |
| 67. |
ETHYLENE GLYCOL/NANOCELLULOSE BASED NANOFLUID COOLANT FOR MACHINING NICKEL ALLOY |
Member |
25-AUG-2018 |
24-NOV-2020 |
Selesai (Mencapai Semua KPI) |
| 68. |
MODES AND PROGRESSION OF TOOL DETERIORATION AND THEIR EFFECTS ON CUTTING FORCE DURING END MILLING OF HASTELLOY 242 NICKEL BASED SUPERALLOY WITH NANO COOLANT APPROACH |
Member |
25-APR-2018 |
24-JUL-2020 |
Tamat (Laporan akhir dikembalikan dan perlu dihantar semula) |
| 69. |
INVESTIGATION OF THE INFLUENCE OF SYNTHESIS PARAMETER ON TEMPLATE BASED ELECTRODEPOSITED COBALT NANOWIRES
|
Member |
05-APR-2018 |
04-JUL-2020 |
Tamat (Perlu hantar laporan akhir) |
| 70. |
IONIZATION PROBE DEVELOPMENT FOR GASEOUS FUEL ENGINE COMBUSTION ANALYSIS |
Member |
01-APR-2018 |
30-JUN-2020 |
Tamat (Perlu hantar laporan akhir) |
| 71. |
Development of HAp (Ca5(PO4)3(OH)) Reinforced Biodegradable Porous Structures through Polymer Deposition Technology for Tissue Engineering Applications |
Leader |
01-JAN-2018 |
31-MAR-2021 |
Selesai (Mencapai Semua KPI) |
| 72. |
Machinability study of structural automotive alloys using abrasive waterjet machining process |
Member |
20-SEP-2017 |
19-SEP-2019 |
Selesai (Mencapai Semua KPI) |
| 73. |
Fundamental study of hybrid graphene oxide and nanofibrillated cellulose for aircraft wings application |
Member |
15-AUG-2017 |
14-AUG-2019 |
Selesai (Mencapai Semua KPI) |
| 74. |
INVESTIGATION OF DYNAMIC MODEL UPDATING OF CAR CRASH BOX FOR CRASHWORTHINESS ANALYSIS
|
Member |
15-AUG-2017 |
14-NOV-2020 |
Selesai (Tidak Mencapai KPI) |
| 75. |
Formulation of Initial Flaw Size for New Crack Growth under Fatigue Loading |
Member |
15-AUG-2017 |
14-AUG-2019 |
Selesai (Mencapai Semua KPI) |
| 76. |
Sustainable Green Machining By Nanoparticles Suspended Coolant |
Leader |
28-JUN-2017 |
27-JUN-2019 |
Selesai (Mencapai Semua KPI) |
| 77. |
MODES AND PROGRESSION OF TOOL DETERIORATION AND THEIR EFFECTS ON CUTTING FORCE DURING END MILLING OF 718PLUS NI-BASED SUPERALLOY USING CARBIDE TOOLS |
Member |
20-JUN-2017 |
19-JUN-2019 |
Tamat (Laporan akhir dikembalikan dan perlu dihantar semula) |
| 78. |
DEVELOPMENT OF GLASS FIBER REINFORCED POLYPROYLENE-POLYAMIDE AND POLYCARBONATE-POLYAMIDE BASED COMPOSITES FOR ENGINEERING APPLICATIONS |
Member |
20-JUN-2017 |
19-JUN-2019 |
Tamat (Perlu hantar laporan akhir) |
| 79. |
DEVELOPMENT OF GRAPHENE-CNT COOLANT TO ENHANCE END MILLING MACHINING PERFORMANCE |
Member |
20-JUN-2017 |
19-JUN-2019 |
Selesai (Mencapai Semua KPI) |
| 80. |
DEVELOPMENT OF NICKEL-BASED NANOPOL YMER FOR AUTOMOTIVE DASHBOARD |
Member |
20-JUN-2017 |
19-JUN-2019 |
Selesai (Mencapai Semua KPI) |
| 81. |
SYNTHESIS OF SILVER NANOWIRES HYBRID THIN FILM FOR ADVANCED AUTOMOTIVE APPLICATION |
Member |
20-JUN-2017 |
19-JUN-2019 |
Selesai (Mencapai Semua KPI) |
| 82. |
Effect Of Solution Concentration And Temperature On The Growth Of Ferromagnetic Nanowires During Electrodeposition |
Member |
01-MAR-2017 |
01-MAR-2019 |
Selesai (Mencapai Semua KPI) |
| 83. |
Investigation of Nanofluid-MQL machining Performance for Aluminum Alloy in End Milling Process |
Leader |
01-OCT-2016 |
30-SEP-2018 |
Selesai (Mencapai Semua KPI) |
| 84. |
Investigation on Electric Motor as an Actuator of Anti Skid Control System to Improve the Safety of Small Electric Vehicle |
Member |
01-AUG-2016 |
31-JUL-2019 |
Selesai (Mencapai Semua KPI) |
| 85. |
Fundamental Study of Nano-Diesel Blend Fuels in Ultra-low Emission Homogeneous Charge Compression Ignition Engine |
Member |
01-AUG-2016 |
31-JUL-2018 |
Selesai (Mencapai Semua KPI) |
| 86. |
Evaluation of the Surface Integrity Generated from Sustainable Machining of Austenitic Stainless Steel with Internally Cooled Cutting Tool |
Member |
01-AUG-2016 |
31-JUL-2019 |
Selesai (Tidak Mencapai KPI) |
| 87. |
Synthesis and Characterization of One Dimensional Modified Cobalt Nanowires for Nanoscale Mechanical Devices |
Member |
01-AUG-2016 |
31-JUL-2018 |
Selesai (Mencapai Semua KPI) |
| 88. |
DIRECT METAL LASER SINTERING TECHNOLOGY FOR THE MANUFACTURE OF FULLY POROUS FUNCTIONALLY GRADED TITANIUM ALLOY FEMORAL STEMS |
Member |
01-JUL-2016 |
30-JUN-2019 |
Tamat (Laporan akhir dalam semakan) |
| 89. |
Surface Integrity of Al-Si/AlN MMC in End Milling Machining Process under Dry Cutting Condition |
Member |
25-JUN-2016 |
24-JUN-2018 |
Tamat (Perlu hantar laporan akhir) |
| 90. |
DIRECT METAL LASER SINTERING TECHNOLOGY FOR THE MANUFACTURE OF FULLY POROUS FUNCTIONALLY GRADED TITANIUM ALLOY FEMORAL STEMS (FABRICATION AND DESIGNING OF FULLY POROUS FUNCTIONALLY GRADED TITANIUM ALLOY FEMORAL STEMS) |
Member |
01-JUN-2016 |
01-JUN-2019 |
Tamat (Laporan akhir dalam semakan) |
| 91. |
Characteristics Study of Co-30Cr-7Mo Dental Alloys Using Direct Metal Laser Melting process |
Member |
25-MAY-2016 |
24-MAY-2018 |
Tamat (Tutup Projek) |
| 92. |
INVESTIGATION OF DISPERSION, STABILITY, AND TRIBOLOGICAL PERFORMANCE OF OIL-BASED GRAPHENE AND COPPER NANOFLUIDS |
Member |
25-MAY-2016 |
24-MAY-2018 |
Selesai (Mencapai Semua KPI) |
| 93. |
Investigation of the influence of synthesis parameter on template based electrodeposited Ni nanowires |
Member |
25-MAY-2016 |
24-MAY-2018 |
Selesai (Mencapai Semua KPI) |
| 94. |
Environmental Friendly Sustainable Biofuel for Diesel Engine using Algae |
Member |
10-MAY-2016 |
09-MAY-2018 |
Tamat (Tutup Projek) |
| 95. |
An Experimental Analysis of a HCCI Diesel FUEL Engine Using Copper Nanoparticles Blended Diesel Fuel |
Member |
05-MAY-2016 |
04-MAY-2018 |
Tamat (Tutup Projek) |
| 96. |
Investigate the effect of Nanolubricant for Enhancing the Vehicle Air-Conditioning Efficiency |
Member |
05-APR-2016 |
04-APR-2018 |
Selesai (Mencapai Semua KPI) |
| 97. |
Thermal Management of Vehicle Radiator by Nanofluids |
Member |
01-JAN-2016 |
31-DEC-2018 |
Selesai (Mencapai Semua KPI) |
| 98. |
Investigation of Machinability Characteristics of Cobalt-Chromium Alloy Produced by Different Powder Metallurgy Techniques |
Member |
01-JAN-2016 |
31-JAN-2018 |
Selesai (Mencapai Semua KPI) |
| 99. |
Biodiesel-diesel (up to 45%) Fuel Characteristics on Homogeneous Charge compression Ignition Engine |
Leader |
15-DEC-2015 |
14-DEC-2017 |
Selesai (Mencapai Semua KPI) |
| 100. |
Hydroxyapatite Coating on Laser Melted-CoCrMo Compact using various thicknesses of oxide interlayers for Biomedical Applications |
Member |
01-DEC-2015 |
30-NOV-2017 |
Selesai (Mencapai Semua KPI) |
| 101. |
Tribological Behavior of Journal Bearing Material under Nano Carbon Tube |
Member |
01-OCT-2015 |
30-SEP-2017 |
Selesai (Mencapai Semua KPI) |
| 102. |
An Auto-Ignition Study in Engine using HCCI and Carbon Nanotubes |
Member |
25-JUN-2015 |
24-JUN-2017 |
Selesai (Mencapai Semua KPI) |
| 103. |
Computational Method to Estimate Fatigue Life and Durability of Spur Gear by using Stress-Life (SN) and Measurement of Root Stress Data |
Member |
25-JUN-2015 |
24-JUN-2017 |
Tamat (Tutup Projek) |
| 104. |
Thermal Exergy Analysis to System Optimization of Gas Turbine for Local Power Plant Industries |
Member |
25-JUN-2015 |
24-JUN-2017 |
Tamat (Tutup Projek) |
| 105. |
Development of AI-SiC Nano-Composite for Automotive Brake Disc Application |
Member |
25-JUN-2015 |
24-JUN-2017 |
Tamat (Tutup Projek) |
| 106. |
Progressive Wear in Sustainable Machining of Cobalt Chromium Alloy using Cutting Inserts of Different Coating Materials |
Member |
25-JUN-2015 |
24-JUN-2017 |
Tamat (Perlu hantar laporan akhir) |
| 107. |
Development of Test Equipment to Study Tooth Bending Strength of Helical Gears in Automotive Transmission |
Member |
25-NOV-2014 |
24-NOV-2016 |
Tamat (Tutup Projek) |
| 108. |
Hybrid Nanoparticles with Ethylene Glycol for Car Radiator Application |
Member |
25-NOV-2014 |
24-NOV-2016 |
Tamat (Tutup Projek) |
| 109. |
Impact Biodiesel Fuel Characteristics on Ultra-Low Emission Homogeneous Charge Compression Ignition Engine |
Leader |
15-NOV-2014 |
14-NOV-2016 |
Selesai (Mencapai Semua KPI) |
| 110. |
Valve Wear Analysis with Nano Coating for Compressed Natural Gas (CNG) Engine |
Member |
15-NOV-2014 |
14-NOV-2016 |
Tamat (Tutup Projek) |
| 111. |
An Experimental Study of Jatropha Oil on Ultra-Low Emission Homogeneous Charge Compression Ignition Engine Combustion |
Leader |
25-JUL-2014 |
24-JUL-2016 |
Selesai (Mencapai Semua KPI) |
| 112. |
Multiobjective Evolutionary Optimization on Performance Measures of Minimum Quality Lubricant in Grinding Process |
Leader |
25-JUL-2014 |
24-JUL-2016 |
Selesai (Mencapai Semua KPI) |
| 113. |
Multiaxial Modelling of Lightweight Sandwich Structures based on Corrugated-cores for Aerospace Application
|
Member |
01-JUL-2014 |
30-JUN-2017 |
Tamat (Tutup Projek) |
| 114. |
Characterization of Biodegradable Composites Based on Pineapple Leaf Fibre and Tapioca Bioplastic Resin
|
Member |
01-JUL-2014 |
30-JUN-2016 |
Tamat (Tutup Projek) |
| 115. |
Engine Valve Seat wear study on Compressed Natural Gas (CNG)by using Nano Powder
|
Member |
01-JUL-2014 |
30-JUN-2017 |
Tamat (Tutup Projek) |
| 116. |
Development of a Smart Cutting Tool for Sustainable Machining of Nickel Based Alloys for the Application to Turbocharger Manufacturing |
Member |
05-JUN-2014 |
04-JUN-2016 |
Tamat (Tutup Projek) |
| 117. |
Development of Titanium Manganese Alloys Foams for Biomedical Applications by Metal Injection Molding |
Member |
25-APR-2014 |
24-APR-2016 |
Tamat (Tutup Projek) |
| 118. |
Study of Multiaxial Fatigue Characteristics of Alminium Alloy Automobile Suspension Systems |
Leader |
25-FEB-2014 |
24-FEB-2017 |
Selesai (Mencapai Semua KPI) |
| 119. |
Development of Optimal Quantity Lubrication Tecnique using nanofluids for Sustainable Machining of Aluminium Alloys |
Leader |
25-FEB-2014 |
24-FEB-2017 |
Selesai (Mencapai Semua KPI) |
| 120. |
Development of Multiaxial Fatigue Modelling for Lightweight Automotive Suspension Components |
Leader |
25-DEC-2013 |
24-DEC-2015 |
Selesai (Mencapai Semua KPI) |
| 121. |
Multiaxial Fatigue Modelling for Safety-critical Lightweight Automotive Suspension Components |
Leader |
01-DEC-2013 |
30-NOV-2016 |
Selesai (Mencapai Semua KPI) |
| 122. |
Development and Characteristics of Waste Cooking Oil as Bio -lubricant and Nano-Lubricant at High Temperature |
Member |
01-DEC-2013 |
30-NOV-2015 |
Selesai (Mencapai Semua KPI) |
| 123. |
Fundamental Study Of Jatropha Biodiesel Oil On Ultra-Low Emission Homogeneous Charge Compression Ignition Engine Combustion |
Member |
01-DEC-2013 |
30-NOV-2016 |
Selesai (Tidak Mencapai KPI) |
| 124. |
Characteristiction of Engine Oil with Nano Particle as an Additives |
Member |
25-NOV-2013 |
24-NOV-2015 |
Tamat (Tutup Projek) |
| 125. |
Development of Fuel Testing System on Chassis Dynamometer for Compressed Natural Gas Direct Injection Powered Vehicle |
Member |
15-MAY-2013 |
30-NOV-2015 |
Tamat (Tutup Projek) |
| 126. |
Solder Joint Reliability Between Lead Free Solder and
Direct Immersion Gold Surface Finish for Automotive
Electronic Devices Application
|
Member |
01-APR-2013 |
31-MAR-2015 |
Selesai (Mencapai Semua KPI) |
| 127. |
New Type Of Coating Material For Automotive Electronic Devices Application |
Member |
01-JUN-2012 |
31-MAY-2014 |
Tamat (Perlu hantar laporan akhir) |
| 128. |
Development Of A New Technique To Weld Dissimilar Metals For Automotive Applications |
Member |
01-JUN-2012 |
31-MAY-2014 |
Selesai (Mencapai Semua KPI) |
| 129. |
Development Of EDM Injection Flushing Technique To Enhance Machining Performance On Titanium Alloy For Automotive Valve Application |
Member |
01-JUN-2012 |
31-MAY-2014 |
Tamat (Tutup Projek) |
| 130. |
Potential of Integrated Chatter Avoidance and Minimum Quantity Lubrication Condition in Machining Process |
Member |
01-MAY-2012 |
30-APR-2014 |
Selesai (Tidak Mencapai KPI) |
| 131. |
Modelling and Performance Characteristics of Finned Flat Tubes Heat Exchanger |
Leader |
01-MAY-2012 |
30-APR-2015 |
Selesai (Mencapai Semua KPI) |
| 132. |
Nanoparticle Based Coolants in Grinding Processes For Automotive Industry Cooling Applications |
Leader |
01-APR-2012 |
31-MAR-2014 |
Selesai (Mencapai Semua KPI) |
| 133. |
DESIGN AND DEVELOPMENT OF PLUG IN ELECTRIC VEHICLE FOR PROTON GREEN MOBILITY CHALLENGE (PGMC) 2012: THE UMP-EV TEAM |
Member |
20-JAN-2012 |
30-SEP-2012 |
Tamat (Perlu hantar laporan akhir) |
| 134. |
Development of Tool-Life Performance Model for Mold and Die Using Near Dry Machining Technique |
Member |
01-SEP-2011 |
01-SEP-2013 |
Selesai (Mencapai Semua KPI) |
| 135. |
A Frequency Domain Approach for Fatigue Life Estimation of An Automotive Suspension System |
Member |
15-AUG-2011 |
15-FEB-2013 |
Tamat (Tutup Projek) |
| 136. |
Development of New Lubricant Dispersed with Nanoparticles |
Member |
01-AUG-2011 |
01-NOV-2012 |
Tamat (Perlu hantar laporan akhir) |
| 137. |
Surface Impregnation/modification using Nanomaterials for Enhanced Mechanical Properties of Metal Surfaces |
Member |
15-JUL-2011 |
15-JUL-2012 |
Tamat (Tutup Projek) |
| 138. |
Development of a New Algorithm to Characterize the Heat Transfer of Fins in Automotive Applications |
Leader |
15-JUL-2011 |
15-JUL-2013 |
Tamat (Tutup Projek) |
| 139. |
Minimum Quality Lubication Technique for End Mill to Enhance Machinability of Aluminum Alloys |
Leader |
08-JUL-2011 |
08-JAN-2014 |
Selesai (Mencapai Semua KPI) |
| 140. |
Characterization of Heat Transfer Process for Hydrogen Fueled Internal Combustion Engine |
Leader |
15-NOV-2010 |
14-NOV-2011 |
Tamat (Tutup Projek) |
| 141. |
Machining of Nickel Superalloly Material Using Nanofluid as Coolant for Light Alloy Piston |
Member |
15-OCT-2010 |
14-OCT-2011 |
Tamat (Perlu hantar laporan akhir) |
| 142. |
Hybrid Optimization Model to Enhanced the Machinability of Titanium Alloys |
Leader |
15-SEP-2010 |
14-SEP-2012 |
Selesai (Mencapai Semua KPI) |
| 143. |
Performance Characteristics of Gas Turbine Power Plant Based on Various Operation Conditions
|
Leader |
01-JUL-2010 |
30-JUN-2013 |
Selesai (Mencapai Semua KPI) |
| 144. |
Optimal Minimum Quality Lubricant (MQL) for Enhancing the Machinability of Super Alloys
|
Leader |
01-JUL-2010 |
30-JUN-2012 |
Selesai (Mencapai Semua KPI) |
| 145. |
Enzymatic Treated Kenaf Fiber Reinforced Poly Lactic Acid (PLA) Composites:Study the Enzymatic Mechanism of Fiber and Bonding Mechanism of Composites |
Member |
01-JAN-2010 |
30-APR-2012 |
Selesai (Mencapai Semua KPI) |
| 146. |
Machining Performance of Power Mixed Electrical Discharge Machining (PMEDM) on Titanium Alloy
|
Leader |
01-DEC-2009 |
30-NOV-2012 |
Tamat (Tutup Projek) |
| 147. |
An Investigation of Wind Power Potential at Kuala Pahang, Pekan.
|
Member |
01-NOV-2009 |
30-NOV-2011 |
Selesai (Mencapai Semua KPI) |
| 148. |
Heat Transfer Augmentation with Aluminium Oxide Nanofluid in a Plain Tube and With Inserts |
Member |
01-OCT-2009 |
30-SEP-2010 |
Tamat (Perlu hantar laporan akhir) |
| 149. |
Accuracy of Stainless Steel Thick Plates in Peripheral Machining |
Member |
01-OCT-2009 |
30-SEP-2010 |
Selesai (Mencapai Semua KPI) |
| 150. |
Production Of Composites From Oil Palm Fibre With Recycled Polyetheyelne and Polypropylene |
Member |
01-AUG-2009 |
31-JUL-2011 |
Tamat (Perlu hantar laporan akhir) |
| 151. |
Malaysian Grown Kenaf Fibre Reinforced Polylactic Acid-PLA Composites (Biodegradable) for Structural Application |
Member |
01-AUG-2009 |
31-JUL-2011 |
Tamat (Perlu hantar laporan akhir) |
| 152. |
A Novel and Flexible Solar Car Kit for Educational Use |
Member |
01-AUG-2009 |
31-JUL-2010 |
Tamat (Perlu hantar laporan akhir) |
| 153. |
Experimental Investigation of Machining Performance of Near Dry and Powder Mixed Dielectric (PMD) Electrical Discharge Machining (EDM) on Titanium Alloys |
Leader |
01-MAY-2009 |
30-NOV-2010 |
Selesai (Mencapai Semua KPI) |
| 154. |
Development of Heat Transfer Techniques for Hydrogen Fuelled Internal Combustion Engine |
Leader |
01-MAY-2009 |
30-NOV-2010 |
Selesai (Mencapai Semua KPI) |
| 155. |
Design And Efficient Performance Appraisal Of Hydrogen Fueled Automobile Engines Combustion Chamber And Port Injector |
Member |
01-MAY-2009 |
30-APR-2010 |
Selesai (Mencapai Semua KPI) |
| 156. |
Experimental Laser-micromaching of MEMS components |
Member |
01-MAY-2009 |
30-APR-2011 |
Tamat (Perlu hantar laporan akhir) |
| 157. |
Development of Micro-EDM with Microactuator Feed Control System |
Member |
01-MAY-2009 |
30-APR-2011 |
Selesai (Mencapai Semua KPI) |
| 158. |
Optimization of Grinding Wheel Parameters with Intelligent Techniques |
Member |
05-JAN-2009 |
30-NOV-2011 |
Selesai (Mencapai Semua KPI) |
| 159. |
Study Of Hydrogen Fueled Internal Combustion Engine Heat Transfer |
Leader |
03-JAN-2009 |
28-FEB-2012 |
Selesai (Mencapai Semua KPI) |
| 160. |
Simulation of 2-Dimensional of droplet motion on inclined surface phenomenon using lattice Boltmann method (LBM) algorithm |
Member |
01-AUG-2008 |
31-JUL-2009 |
Selesai (Mencapai Semua KPI) |
| 161. |
Development of Tribiological/ Wear Resistance of Stainless Steel By Plasma Nitriding |
Member |
09-JAN-2007 |
31-AUG-2008 |
Selesai (Mencapai Semua KPI) |
| 162. |
Experimental Study On Fatigue Life Of Spot Welded High Stregth Stell Sheet For Automative Components. |
Leader |
09-JAN-2007 |
31-AUG-2008 |
Tamat (Tutup Projek) |
| 163. |
Numerical Study on Fatigue Life on Spot Welded Automotive Components. |
Member |
09-JAN-2007 |
31-AUG-2008 |
Selesai (Mencapai Semua KPI) |
|
| |
|
PUBLICATION |
| TYPE |
PUBLICATION |
TARIKH PENERBITAN |
TYPE OF CONTRIBUTION |
REFEREED PUBLICATION |
| BOOK CHAPTER |
Rahim, M.A., Rahman, M.M., Rahman, M.A., Muzahid, A.J.M., Kamarulzaman, S.F. A Framework of IoT-Enabled Vehicular Noise Intensity Monitoring System for Smart City. |
30/04/2021 |
Main Contributor |
| JOURNAL |
MA Rahim, MM Rahman, MA Rahman, AJM Muzahid, SF Kamarulzaman. Evolution of IoT-enabled connectivity and applications in automotive industry: A review. |
31/01/2021 |
Main Contributor |
| JOURNAL |
Safiei, W., Rahman, M.M., Yusoff, A.R., Arifin, M.N., Tasnim, W. Effects of SiO2-Al2O3-ZrO2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using Uncoated and Coated Cutting Inserts with Minimal Quantity Lubricant Method. |
30/04/2021 |
Main Contributor |
| JOURNAL |
The thermal and auto-ignition performance of a homogeneous charge compression ignition engine fuelled with diethyl ether and ethanol blends. Applied Thermal Engineering |
31/03/2021 |
Main contributor |
| JOURNAL |
Urmi, W.T., Shafiqah, A.S., Rahman, M.M., Kadirgama, K., Maleque, M.A. Preparation Methods and Challenges of Hybrid Nanofluids: A Review. |
28/02/2021 |
Main Contributor |
| CONFERENCE PAPER |
4. M. Norhafana, M.M. Noor, Pshtiwan M. Sharif, F.Y Hagos, A.A. Hairuddin, K. Kadirgama, D. Ramasamy, M.M. Rahman, R. Alenezi and A.T. Hoang. A review of the performance and emissions of nano additives in diesel fuelled compression ignition-engines. |
09/02/2019 |
Co-author |
| CONFERENCE PAPER |
F. Benedict, K. Kadirgama, D. Ramasamy, M.M. Noor, M. Asok Raj Kumar, M.M. Rahman, Z. Ghazali, B. Sagmesh. Thermal Management of Vehicle Radiator Bynanocellulose with One-Dimensional Analysis, |
07/02/2019 |
Co-author |
| CONFERENCE PAPER |
F. Benedict, K. Kadirgama, D. Ramasamy, M.M. Noor, M. Samykano, M.M. Rahman, B. Sagmesh. Nanocellulose as Heat Transfer Liquid in Heat Exchanger. |
07/02/2019 |
Co-author |
| CONFERENCE PAPER |
K Farhana, A S F Mahamude, K Kadirgama, M M Rahman, M M Noor and D Ramasamy. Internal energy analysis with nanofluids in header and riser tube of flat plate solar collector by CFD modelling. |
28/02/2019 |
Co-author |
| CONFERENCE PAPER |
K Farhana, K Kadirgama, M M Noor, M M Rahman, D Ramasamy and A S F Mahamude. CFD modelling of different properties of nanofluids in header and riser tube of flat plate solar collector. |
28/02/2019 |
Co-author |
| CONFERENCE PAPER |
K Mohanesen, D Ramasamy, K Kadirgama, M M Noor and M M Rahman. Flame ionization testing in an internal combustion engine to measure the speed of the flame for gaseous fuels. |
28/02/2019 |
Co-author |
| JOURNAL |
Azwan M, Maleque MA, Rahman MM. TIG torch surfacing of metallic materials a critical review. |
07/02/2019 |
Co-author |
| JOURNAL |
9. Hasan, M.M., Rahman, M.M., Kadirgama, K., Ramasamy, D. 2018. Numerical study of engine parameters on combustion and performance characteristics in an n-heptane fueled HCCI engine. |
31/12/2018 |
Main author |
| JOURNAL |
Anamalai, K., Samylingam, L., Kadirgama, K., Samykano, M., Najafi, G., Ramasamy, D., Rahman, M.M. 2018. Multi-objective optimization on the machining parameters for bio-inspired nanocoolant. |
31/12/2018 |
Co-author |
| JOURNAL |
Ariffin, S.Z., Razlan, A., Ali, M.M., Efendee, A.M., Rahman, M.M. Optimization of Coolant Technique Conditions for Machining A319 Aluminium Alloy Using Response Surface Method (RSM). |
31/12/2018 |
Co-author |
| JOURNAL |
K Kadirgama, K Anamalai, K Ramachandran, D Ramasamy, M Samykano, A Kottasamy, MM Rahman. Thermal analysis of SUS 304 stainless steel using ethylene glycol/nanocellulose-based nanofluid coolant. The |
31/12/2018 |
Co-author |
| JOURNAL |
Kamal, M., Rahman, M.M. 2018. Advances in fatigue life modeling: A review. |
31/12/2018 |
Main author |
| JOURNAL |
M.A. Maleque, L. Harina, K. Bello, M. Azwan and M.M. Rahman. 2018. Tribological properties of surface modified Ti-6Al-4V alloy under lubricated condition using Taguchi approach. |
30/11/2018 |
Co-author |
| JOURNAL |
MM Rahman, AH Jassim, TA Tahseen, M Ishak, KI Hamada Hybrid CFD-ANN Scheme for Air Flow and Heat Transfer Across In-Line Flat Tubes Array. |
31/12/2018 |
Main author |
| JOURNAL |
Safiei, W., Rahman, M.M., Rusdan, S.A. Experimental investigation of MQL optimum parameters in end milling of AA6061-T6 using Taguchi method. |
31/12/2018 |
Main author |
| JOURNAL |
Sakinah, M.H., Hassan, M.A., Kadirgama, K., Kadirgama, G., Ramasamy, D., Amirruddin, A.K., Rahman, M.M., Noor, M.M. Optimization on wear performance of anti wear additive added biolubricant. |
31/12/2018 |
Co-author |
| JOURNAL |
Samylingam, L., Anamalai, K., Kadirgama, K., Samykano, M., Ramasamy, D., Noor, M.M., Najafi, G., Rahman, M.M., Xian, H.W., Che Sidik, N.A. Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. |
31/12/2018 |
Co-author |
| BOOK CHAPTER |
M. H. Sakinah, M. A. Hassan, K. Kadirgama, Ganesan Kadirgama, D. Ramasamy, A. K. Amirruddin, M. M. Rahman, M. M. Noor. Optimization on Wear Performance of Anti Wear Additive Added Biolubricant. Improved Performance of Materials pp 1-9. Chapter. |
31/12/2017 |
Co-author |
| CONFERENCE PAPER |
Ashikur Rahman Khan, M., Rahman, M.M. Surface finish characteristics of titanium alloy in a non conventional technique. |
31/12/2017 |
Main Author |
| CONFERENCE PAPER |
KC Hwa, D Ramasamy, K Kadirgama, MM Noor, MM Rahman, M Samykano. Methods of preparing internal combustion engine cylinder bore surfaces for frictional improvement. |
30/12/2017 |
Co-author |
| CONFERENCE PAPER |
NAZ Abdullah, MSM Sani, MM Rahman and I. Zaman. Correlation of numerical and experimental analysis for dynamic behaviour of a body-in-white (BIW) structure. |
23/02/2017 |
Co-author |
| CONFERENCE PAPER |
Zahidi, M.K., Hanipah, M.R., Ramasamy, D., Noor, M.M., Kadirgama, K., Rahman, M.M. The two-stroke poppet valve engine. Part 1: Intake and exhaust ports flow experimental assessments. |
31/12/2017 |
Co-author |
| JOURNAL |
21. Khan, M.A.R., Rahman, M.M.2017. Surface characteristics of Ti-5Al-2.5Sn in electrical discharge machining using negative polarity of electrode. |
31/12/2017 |
Main author |
| JOURNAL |
Abdullah, N.A.Z., Sani, M.S.M., Husain, N.A., Rahman, M.M., Zaman, I. Dynamics properties of a Go-kart chassis structure and its prediction improvement using model updating approach. |
31/12/2017 |
Co-author |
| JOURNAL |
Hasan, M.M., Rahman, M.M. 2017. Performance and emission characteristics of biodieseldiesel blend and environmental and economic impacts of biodiesel production: A review. |
31/12/2017 |
Main author |
| JOURNAL |
Hasan, M.M., Rahman, M.M., Nomani Kabir, M., Abdullah, A.A. Numerical Study on the Combustion and Performance Characteristics of a HCCI Engine Resulting from the Autoignition of Gasoline Surrogate Fuel. |
31/12/2017 |
Main author |
| JOURNAL |
Hisham, S., Kadirgama, K., Ramasamy, D., Noor, M.M., Amirruddin, A.K., Najafi, G., Rahman, M.M. Waste cooking oil blended with the engine oil for reduction of friction and wear on piston skirt. |
31/12/2017 |
Co-author |
| JOURNAL |
Hussein, A.M., Noor, M.M., Kadirgama, K., Ramasamy, D., Rahman, M.M. Heat transfer enhancement using hybrid nanoparticles in ethylene glycol through a horizontal heated tube. |
31/12/2017 |
Co-author |
| JOURNAL |
Ibrahim, T.K., Kamil, M., Awad, O.I., Rahman, M.M., Najafi, G., Basrawi, F., Abd Alla, A.N., Mamat, R. The optimum performance of the combined cycle power plant: A comprehensive review. |
31/12/2017 |
Co-author |
| JOURNAL |
Kamal, M., Rahman, M.M. Fatigue life prediction of titanium alloy for block loading using the hybrid approach of critical plane and continuum damage mechanics. |
31/12/2017 |
Main author |
| JOURNAL |
Kottasamy, A., Kadirgama, K., Annamalai, K., Mohanesan, K., Ramasamy, D., Noor, M.M., Rahman, M.M., Hanipah, M.R. Titanium oxide with nanocoolant for heat exchanger application. |
31/12/2017 |
Co-author |
| JOURNAL |
M. Kamal and M. M. Rahman. Multiaxial fatigue life modelling using hybrid approach of critical plane and genetic algorithm |
31/12/2017 |
Main author |
| JOURNAL |
Nimana, B., Verma, A., Di Lullo, G., Rahman, M.M., Canter, C.E., Olateju, B., Zhang, H., Kumar, A. Life Cycle Analysis of Bitumen Transportation to Refineries by Rail and Pipeline. |
31/12/2017 |
Co-author |
| JOURNAL |
Raiyan, M.F., Ahamed, J.U., Rahman, M.M., Salam, M.A. Performance and exergetic investigation of a domestic split air conditioner using blends of R22 and R290. |
31/12/2017 |
Co-author |
| JOURNAL |
Ramasamy, D., Kadirgama, K., Noor, M.M., Rahman, M.M. Experiments on dissimilar valve lift (DVL) for turbulence increment on a bi-fuel Compressed Natural Gas (CNG) engine. |
31/12/2017 |
Co-author |
| JOURNAL |
Ramasamy, D., Mohanesan, K., Kadirgama, K., Noor, M.M., Rahman, M.M. Hybrid electric vehicle car body drag analysis using computational fluid dynamics. |
31/12/2017 |
Co-author |
| JOURNAL |
Razak, N.H., Rahman, M.M., Kadirgama, K.2017. Cutting force and chip formation in end milling operation when machining nickel-based superalloy, Hastelloy C-2000. |
31/12/2017 |
Main author |
| JOURNAL |
Sahid, N.S.M., Rahman, M.M., Kadirgama, K., Maleque, M.A. Experimental investigation on properties of hybrid nanofluids (TiO2 and ZnO) in waterethylene glycol mixture. |
31/12/2017 |
Main author |
| JOURNAL |
Sahid, N.S.M., Rahman, M.M., Kadirgama, K., Ramasamy, D., Maleque, M.A., Noor, M.M. Experimental investigation on the performance of the TiO2 and ZnO hybrid nanocoolant in ethylene glycol mixture towards AA6061-T6 machining. |
31/12/2017 |
Main author |
| JOURNAL |
Sofiah, A.G.N., Samykano, M., Murillo, J.R., Lah, N.A.C., Ramasamy, D., Kadirgama, K., Rahman, M.M. Effect of the length on the tensile deformation of nickel nanowires using molecular dynamics simulations. |
31/12/2017 |
Co-author |
| CONFERENCE PAPER |
Ibrahim TK, Rahman MM, Ali OM, Baswari F, Mamat R. Optimum performance enhancing of the gas turbine based on the effective temperatures |
31/12/2016 |
Main author |
| CONFERENCE PAPER |
MSM Sani, NAZ Abdullah, SN Zahari, JP Siregar and MM Rahman. Finite element model updating of natural fibre reinforced composite structure in structural dynamics. |
31/12/2016 |
Co-author |
| JOURNAL |
46. M.H. Sakinah, A.K. Amiruddin, K. Kadirgama, D. Ramasamy, M.M. Rahman, M.M. Noor. The application of response surface methodology in the investigation of the tribological behaviour of palm cooking oil blended in engine oil |
31/12/2016 |
Co-author |
| JOURNAL |
D Ramasamy, K Kadirgama, MM Noor, MM Rahman. Experiments on Dissimilar Valve Lift (DVL) for Turbulence Increment on a Bi-Fuel Compressed Natural Gas (CNG) Engine. |
31/12/2016 |
Co-author |
| JOURNAL |
Hamada KI, Rahman MM, Damasamy D, Noor MM, Kadirgama K. Numerical Investigation of In-cylinder Flow Characteristics of Hydrogen-Fuelled Internal Combustion Engine |
31/12/2016 |
Main author |
| JOURNAL |
Hasan MM, Rahman MM. A review on properties, combustion, performance, and emission characteristics of biodieseldiesel blend in compression ignition engine. |
31/12/2016 |
Main author |
| JOURNAL |
Hassan MA, Muhamad Hisham Sakinah, Noor MM, Rahman MM. Tribological Behaviour Improvement of Lubricant Using Copper (II) Oxide Nanoparticles as Additive. |
31/12/2016 |
Co-author |
| JOURNAL |
Ibrahim TK, Rahman MM, Mohammed MK, Basrawi F. Statistical analysis and optimum performance of the gas turbine power plant. |
31/12/2016 |
Main author |
| JOURNAL |
JU Ahamed, MF Raiyan, MD Hossain, Rahman MM, B Salam. Production of biogas from anaerobic digestion of poultry droppings and domestic waste using catalytic effect of silica gel. |
31/12/2016 |
Co-author |
| JOURNAL |
Kamal M and Rahman MM. Multiaxial fatigue life modeling using hybrid approach of critical plane and genetic algorithm. |
31/12/2016 |
Main Author |
| JOURNAL |
Kamal M, Rahman MM. Advances in fatigue life modelling: A review. |
31/12/2016 |
Main author |
| JOURNAL |
M.M. Hasan and M.M. Rahman. Homogeneous Charge Compression Ignition Combustion: Advantages over Compression Ignition Combustion, Challenges and Solutions. |
31/12/2016 |
Main author |
| JOURNAL |
M.S. Najiha and M.M. Rahman. Experimental investigation of flank wear in end milling of aluminum alloy with waterbased nanofluid lubricant in minimum quantity lubrication technique. |
31/12/2016 |
Main Author |
| JOURNAL |
M.S. Najiha, M.M. Rahman and A.R. Ysoff. Environmental impacts and hazards associated with metal working fluid and recent advances in the sustainable system: A review. |
31/12/2016 |
Main author |
| JOURNAL |
M.S. Najiha, M.M. Rahman and K. Kadirgama. Performance of water-based TiO2 nanofluid during the minimum quantity lubrication machining of aluminium alloy, AA6061-T6. |
31/12/2016 |
Main author |
| JOURNAL |
M.S. Najiha, M.M. Rahman, A.R. Yusoff. Flank wear characterization in aluminum alloy (6061 T6) with nanofluid MQL environment using uncoated carbide tool. |
31/12/2016 |
Main Author |
| JOURNAL |
MAR Khan, MM Rahman, MS Rahman, Optimal set-up and surface finish characteristics in electrical discharge machining on Ti-5Al-2.5 Sn using graphite. |
31/12/2016 |
Main author |
| JOURNAL |
MS Najiha, MM Rahman and K Kadirgama. Minimum quantity lubrication: Quantifying non-deterministic component of sustainability index for machining operations. |
31/12/2016 |
main author |
| JOURNAL |
MS Najiha, Rahman MM. Parametric Optimization of End Milling Process Under Minimum Quantity Lubrication With Nanofluid as Cutting Medium Using Pareto Optimality Approach. |
31/12/2016 |
Main author |
| JOURNAL |
Maleque MA, Radhi M and Rahman MM. Wear study of Mg-SiCp reinforcement aluminum metal metrix composite |
31/12/2016 |
Co-author |
| JOURNAL |
Rahman MM, Kadirgama K, Noor MM, Ramasamy D. Optimization of abrasive machining of ductile cast iron using TiO2 nanoparticles: A multilayer perception approach. |
31/12/2016 |
Main author |
| JOURNAL |
Selamat ZA, Baba NB, Alias M, Mohamad N, Yusof AR, Rahman MM. Effect of CNC lathe machining performance by Varying coolant nozzle diameter |
31/12/2016 |
Co-author |
| JOURNAL |
Selamat ZA, Baba NB, Alias M, Yusoff AR, Rahman MM. Effect of coolant nozzle sizes on turning aluminum alloy AL319 |
31/12/2016 |
Co-author |
| JOURNAL |
TK Ibrahim, Rahman MM. Effects of Cycle Peak Temperature Ratio On The Performance Of Combined Cycle Power Plant. |
31/12/2016 |
Main author |
| JOURNAL |
Y Muthusamy, K Kadirgama, MM Rahman, D Ramasamy, KV Sharma. Wear analysis when machining AISI 304 with ethylene glycol/TIO2 nanoparticle-based coolant. |
31/12/2016 |
Co-author |
| JOURNAL |
M. A. R. Khan, M.M. Rahman and K. Kadirgama. An experimental investigation on surface finish in die-sinking EDM of Ti-5Al-2.5Sn. |
31/12/2015 |
Main author |
| JOURNAL |
Mohammed Kamil and M.M. Rahman. Performance prediction of spark-ignition engine running on gasoline-hydrogen and ethane-hydrogen blends. |
31/12/2015 |
Main author |
| JOURNAL |
TA Tahseen, M Ishak, MM Rahman. An overview on thermal and fluid flow characteristics in a plain plate finned and un-finned tube banks heat exchanger. |
31/12/2015 |
Main author |
| JOURNAL |
Kamal, M. and M. M., Rahman. Finite Element-Based Fatigue Behaviour of Springs in Automobile Suspension. |
30/12/2014 |
Main Author |
| JOURNAL |
M.S. Najiha and M.M. Rahman. Minimum Quantity Lubricant Flow with Single and Three Nozzles for Four Teeth Milling Cutter Operations: A CFD Analysis |
30/12/2014 |
Main Author |
| BOOK CHAPTER |
K. Kadirgama, R.A. Bakar, M.M. Rahman, B. Mohamad. 2012. Modeling of residual stress (Chapter 14). Finite element analysis- From biomedical applications to industrial developments. |
31/12/2012 |
Co-author |
| BOOK CHAPTER |
Rosli A. Bakar, K. Kadirgama, M.M. Rahman, K.V. Sharma and Semin. Application of Natural gas for Internal Combustion Engines. (Chapter 18). In: Advances in Natural Gas Technology. |
31/12/2012 |
Co-author |
| JOURNAL |
K. Kadirgama, M.M. Rahman, A. R. Ismail, R.A. Bakar. A surrogate modelling to predict surface roughness and surface texture when grinding AISI 1042 carbon steel. |
30/12/2012 |
Co-author |
| JOURNAL |
Khalaf I. Hamada, M.M. Rahman and A. Rashid A. Aziz. Development of a computational fluid dynamics model for direct injection hydrogen fueled engine. |
30/12/2012 |
Main Author |
| JOURNAL |
M. Kamal and M.M. Rahman. Study on the dynamic behavior of wishbone suspension system. |
30/12/2012 |
Main Author |
| JOURNAL |
M. M. Fakir, S. Basri, M. M. Rahman and Rosli A. Bakar. Efficient Finite Element and Differential Quadrature Methods for Heat Distribution in One-Dimensional Insulated-Tip Rectangular Fin. |
30/12/2012 |
Co-author |
| JOURNAL |
M.F. Abdul Rahim, M.M. Rahman and R.A. Bakar. Cycle Engine Modelling of Spark Ignition Engine Processes during Wide-Open Throttle (WOT) Engine Operation Running by Gasoline Fuel. |
30/12/2012 |
Main Author |
| JOURNAL |
M.I. Rafiqul, M. Ishak and M.M. Rahman. Effects of Heat Input on Mechanical Properties of Metal inert gas welded 1.6 mm thick galvanized steel sheet. |
30/12/2012 |
Co-author |
| JOURNAL |
M.M. Hemin, M.M. Rahman and R.M. Omar. Novel design of lower arm vehicle using finite element analysis and statistical method. |
30/12/2012 |
Main Author |
| JOURNAL |
M.M. Rahman, Khalaf I. Hamada, K. Kadirgama and Rosli A. Bakar. Cycle analysis of in-cylinder heat transfer characteristics for hydrogen fueled engine. |
30/12/2012 |
Main Author |
| JOURNAL |
M.M. Rahman. Modeling of machining parameters of Ti-6Al-4V for electric discharge machining: A neural network approach. |
30/12/2012 |
Main Author |
| JOURNAL |
M.S.Najiha, M.M. Rahman, A.R. Yusoff, K. Kadirgama and H.A. Salaam. The minimum quantity lubricant flow analysis in milling operation: a CFD approach. |
30/12/2012 |
Main Author |
| JOURNAL |
Md. Ashikur Rahman Khan, M.M. Rahman, K. Kadirgama and A.R. Ismail. Mathematical model for wear rate of negative graphite electrode in electrical discharge machining on Ti5Al2.5Sn. |
30/12/2012 |
Main Author |
| JOURNAL |
Md. Ashikur rahman Khan, M.M. Rahman, K.Kadirgama and A.R. Ismail. RSM Model to Evaluate MaterialRemoval Rate in EDM of Ti-5Al-2.5Sn using Graphite Electrode. |
30/12/2012 |
Main Author |
| JOURNAL |
N. H. Razak, M. M. Rahman and K. Kadirgama. Response surface design model to predict the surface roughness when machining HASTELLOY C-2000 using uncoated carbide insert. |
30/12/2012 |
Main Author |
| JOURNAL |
Najiha MS, Rahman MM, Yusoff AR, Kadirgama K and Salaam HA. The minimum quantity lubricant flow analysis in milling operation: a CFD approach. International Journal of Automotive and Mechanical Engineering, 6: 673-761. (Scopus Index) |
30/12/2012 |
Main author |
| JOURNAL |
Thamir K. Ibrahim, M.M. Rahman. Effect of compression ratio on performance of combined cycle gas turbine. |
30/12/2012 |
Main Author |
| BOOK CHAPTER |
M.M. Rahman, Md. Ashikur Rahman Khan, K. Kadirgama and Rosli A. Bakar. Prediction of Material Removal Rate for Ti-5Al-2.5Sn in EDM using MultiLayered Perceptron Neural Network Technique. pp. 17-23 (ISI/SCI indexed). |
28/02/2011 |
Main Author |
| BOOK CHAPTER |
M.M. Rahman, Md. Ashikur Rahman Khan, K. Kadirgama, M.A. Maleque and Rosli A. Bakar. Parametric Optimization in EDM of Ti-6Al-4V using Copper Tungsten Electrode and Positive Polarity: A Statistical Approach. 23-29 (ISI/SCI indexed). |
31/12/2011 |
Main author |
| JOURNAL |
Adebisi AA, Maleque MA and Rahman MM. Metal matrix composite brake rotor: Historical development and product life cycle analysis |
30/12/2011 |
Co-author |
| JOURNAL |
Adebisi AA, Maleque MA and Rahman MM. Metal matrix composite brake rotors: Historical development and product life cycle analysis |
30/12/2011 |
Co-author |
| JOURNAL |
Hemin MM, Rahman MM and Omar RM. Dynamic analysis of vehicle arm based on finite element approach |
30/12/2011 |
Main author |
| JOURNAL |
Hemin MM, Rahman MM and Omar RM. Dynamic analysis of vehicle arm based on finite element approach. |
30/12/2011 |
Main author |
| JOURNAL |
Ibrahim TK, Rahman MM and Abdalla AN. Improvement of gas turbine performance based on inlet air cooling systems: A Technical Review |
30/12/2011 |
Main author |
| JOURNAL |
Ibrahim TK, Rahman MM and Abdalla AN. Optimum Gas Turbine Configuration for Improving the performance of Combined Cycle Power Plant |
30/12/2011 |
Main author |
| JOURNAL |
Kadirgaman K, Rahman MM, Ismail AR and Rosli AB. Finite element analysis of Hastlelloy C-22HS in end milling. |
30/12/2011 |
Main author |
| JOURNAL |
Kamil M, Rahman MM and Rosli AB. Performance evaluation of external mixture formulation strategy in hydrogen fuled engine |
30/12/2011 |
Main author |
| JOURNAL |
Khan MAR, Rahman MM, Kadirgama K, Maleque MA and Ishak M. Prediction of surface roughness of Ti-6Al-4V in electrical discharge machining: A regression model |
30/12/2011 |
Main author |
| JOURNAL |
Khan MAR, Rahman MM, Kadirgama K, Maleque MA and Rosli AB. Artificial Intelligence Model to Predict Surface Roughness of Ti-15-3 Alloy in EDM Process |
30/12/2011 |
Main author |
| JOURNAL |
Khan MAR, Rahman MM, Noor MM, Kadirgama K and Maleque MA. Current Research Trends on Dry, Near-Dry and Powder Mixed Electrical Discharge Machining |
30/12/2011 |
Main author |
| JOURNAL |
M.Z. Nuawi, A.R. Ismail, M.J.M. Nor and M.M. Rahman. A Comparative Study of Whole-Body Vibration Exposure in Train and Car Passengers: A Case Study in Malaysia. |
30/12/2011 |
Co-author |
| JOURNAL |
Maleque MA, Rahman MM and Hossain S. Conceptual Design of Aluminium Metal Matrix Composite Brake Rotor System |
30/12/2011 |
Main author |
| JOURNAL |
Maleque MA, Rahman MM and Hossain S. Conceptual Design of Aluminium Metal Matrix Composite Brake Rotor System |
30/12/2011 |
Main author |
| JOURNAL |
Noor MM, Kadirgama K and Rahman MM. Particle swarm optimization prediction model for surface roughness |
30/12/2011 |
Co-author |
| JOURNAL |
Noor MM, Kadirgama K and Rahman MM. Particle swarm optimization prediction model for surface roughness |
30/12/2011 |
Co-author |
| JOURNAL |
Noor MM, Kadirgama K, Rahman MM and Maleque MA. Pattern Recognition Method to Predict Recycling Strategy for Electronic Equipments |
30/12/2011 |
Co-author |
| JOURNAL |
Noor MM, Kadirgama K, Rahman MM and Maleque MA. Prediction of Recycle Method using Relevance Vector Machine |
30/12/2011 |
Co-author |
| JOURNAL |
Nuawi MZ, Ismail AR, Nor MJM and Rahman MM. A Comparative Study of Whole-Body Vibration Exposure in Train and Car Passengers: A Case Study in Malaysia |
30/12/2011 |
Co-author |
| JOURNAL |
Rahman MM, Hamada KI, Noor MM, Kadirgama K, Rosli AB and Rahim MFA. Heat Transfer Characteristics in Exhaust Port for Hydrogen Fueled Port Injection Engine: A Transient Approach. |
30/12/2011 |
Main author |
| JOURNAL |
Rahman MM, Hamda KI and Kadirgama K. Heat transfer of intake port for hydrogen fueled port injection engine: A steady state approach |
30/12/2011 |
Main author |
| JOURNAL |
Rahman MM, Ibrahim TK and Abdalla AN. Thermodynamic performance analysis of gas turbine power plant |
30/12/2011 |
Main author |
| JOURNAL |
Rahman MM, Ibrahim TK, Kadirgama K, Mamat R and Rosli AB. Influence of Operation Conditions and Ambient Temperature on Performance of Gas Turbine Power Plant |
30/12/2011 |
Main author |
| JOURNAL |
Rahman MM, Kamil M and Rosli AB. Engine performance and optimum injection timing for 4-cylinder direct injection hydrogen fueled engine |
30/12/2011 |
Main author |
| JOURNAL |
Rahman MM, Kamil M and Rosli AB. Engine performance and optimum injection timing for 4-cylinder direct injection hydrogen fueled engine |
30/12/2011 |
Main author |
| JOURNAL |
Rahman MM, Khan MAR, Kadirgama K, Noor MM and Rosli AB. Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM using Copper Tungsten Electrode: A Statistical Approach. |
30/12/2011 |
Main author |
| JOURNAL |
Rahman MM, Khan MAR, Noor MM, Kadirgama K, Rosli AB. Optimization of machining parameters on surface roughness in EDM of Ti6Al-4V using response surface method |
30/12/2011 |
Main author |
| JOURNAL |
Rahman MM, Khan MAR, adirgama K, Noor MM and Rosli AB. Experimental investigation into electrical discharge machining of stainless steel 304 |
30/12/2011 |
Main author |
| JOURNAL |
Rahman MM, Mohyaldeen HM, Noor MM, Kadirgama K and Rosli AB. Linear Static Response of Suspension Arm based on Artificial Neural Network Technique |
30/12/2011 |
Main author |
| JOURNAL |
Rahman MM, Noor MM, Kadirgama K, Maleque MA. Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. |
30/12/2011 |
Main author |
| JOURNAL |
Rahman MM. Optimization of Process Parameters on Ti-6Al-4V using Central Composite Design Method. |
30/12/2011 |
Main author |
| JOURNAL |
Sani MSM, Rahman MM, Noor MM, Kadirgama K and Izham MHN. Identification of Dynamics Modal Parameter for Car Chassis |
30/12/2011 |
Co-author |
| JOURNAL |
Srinivasa Rao G, Sharma KV, Chary SP, Rosli AB, Rahman MM, Kadirgama K and Noor MM. Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column. |
30/12/2011 |
Co-author |
| JOURNAL |
Zulkifli A, Ariffin AK and Rahman MM. Probabilistic Finite Element Analysis of Vertebrae of the Lumbar Spine under Hyperextension Loading |
30/12/2011 |
Co-author |
| BOOK CHAPTER |
M.M. Rahman, Md. Ashikur Rahman Khan, K. Kadirgama, M.M. Noor and Rosli A. Bakar. 2010. Mathematical Modeling of material Removal Rate for Ti-5Al-2.5Sn through EMD Process: A Response Surface Method. pp. 34- 37 (ISI/SCI indexed). |
31/08/2010 |
Main Author |
| JOURNAL |
Habeeb HH, Kadirgama K, Noor MM, Rahman MM,Mohammad B, Rosli AB and Abouel Hossein KA. Machining of Nickel Alloy 242 with Cubic Boron Nitride Tools |
30/12/2010 |
Co-author |
| JOURNAL |
Ibrahim TK, Rahman MM and Abd Alla AN. Study on the effective parameter of gas turbine model with intercooled compression process |
30/12/2010 |
Main author |
| JOURNAL |
Kadirgama K, Noor MM, Abou-El-Hossein KA, Habeeb HH, Rahman MM, Mohamad B and Rosli AB.Effect of dry cutting on force and tool life when machining aerospace material |
30/12/2010 |
Co-author |
| JOURNAL |
Kadirgama K, Noor MM, Rahman MM, Sani MSM and Abou-El-Hossein KA. Optimised tool life by partial swarm optimization |
30/12/2010 |
Co-author |
| JOURNAL |
Kadirgama K, Noor MM, Rahman MM, Sani MSM, Rejab MRM, Rosli AB and Abou-El-Hossein KA. Prediction Modelling of Power and Torque in End-Milling |
30/12/2010 |
Co-author |
| JOURNAL |
Kamil M, Rahman MM and Rosli AB. Modeling of common rail fuel injection system of four cylinder hydrogen fueled engine |
30/12/2010 |
Main author |
| JOURNAL |
Noor MM, Kadirgama K, Habeeb HH, Rahman MM and Mohammad B. Performance of carbide cutting tools when machining of nickel based alloy |
30/12/2010 |
Co-author |
| JOURNAL |
Noor MM, Kadirgama K, Rahman MM, Rejab MRM, Sani MSM, Mon TT and Rosli AB. Development of statistical model to predict Ra and Rz in laser cutting
|
30/12/2010 |
Co-author |
| JOURNAL |
Noor MM, Kadirgama K, Rahman MM, Rosli AB and Ibrahim A. Analysis of Entry Qualification for student performance: An Intelligence Approach. |
30/12/2010 |
Co-author |
| JOURNAL |
Noor MM, Kadirgama K, Rahman MM, Zuki NMNM, Muhamad KF, Rejab MRM and Mohamed JJ. Prediction Modelling of Surface Roughness for Laser Beam Cutting on Acrylic Sheets. |
30/12/2010 |
Co-author |
| JOURNAL |
Rahman MM, Hamada KI, Noor MM, Kadirgama K, Maleque MA and Rosli A B.Heat Transfer characteristics of intake port for spark ignition engine: A comparative study |
30/12/2010 |
Main author |
| JOURNAL |
Rahman MM, Hamada KI, Noor MM, Rosli AB, Kadirgama K and Maleque MA. In-Cylinder Heat Transfer Characteristics of Hydrogen Fueled Engine: A Steady State Approach |
30/12/2010 |
Main author |
| JOURNAL |
Rahman MM, Hamada KI, Noor MM, Rosli AB, Kadirgama K and Maleque MA.Transient In-Cylinder Gas Flow Characteristics of Single Cylinder Port Injection Hydrogen Fueled Engine |
30/12/2010 |
Main author |
| JOURNAL |
Rahman MM, Ibrahim TK, Taib MY, Noor MM and Rosli AB. Thermal Analysis of open-cycle regenerator gas-turbine power-plant. World Academy of Science, Engineering and Technology |
30/12/2010 |
Main author |
| JOURNAL |
Rahman MM, Khan MAR, Kadirgama K, Noor MM and Rosli AB. Modeling of material removal on machining of Ti-6Al-4V through EDM using copper tungsten electrode and positive polarity |
30/12/2010 |
Main author |
| JOURNAL |
Rahman MM, Mohammed MK, Rosli A B, Noor MM and Kadirgama K. Trends of air fuel ratio on engine performance of four cylinder direct injection hydrogen fueled engine |
30/12/2010 |
Main author |
| JOURNAL |
Rejab MRM, Sani MSM, Noor MM, Kadirgama K, Rahman MM and Alias A. Mechanical Behaviour of Polymeric Foam Core at Various Orientation Angles |
30/12/2010 |
Co-author |
| JOURNAL |
Sani MSM, Noor MM, Zainury MSM, Rejab MRM, Kadirgama K and Rahman MM. Investigation on Modal Transient Response Analysis of Engine Crankshaft Structure |
30/12/2010 |
Co-author |
| JOURNAL |
Sharma KV, Suryanarayana KV, Sarma PK, Rahman MM, Noor MM and Kadirgama K. Experimental Investigations of Oxygen Stripping From Feed Water in a Spray cum Tray Type Deaerator |
30/12/2010 |
Co-author |
| JOURNAL |
Sharma KV, Suryanarayana KV, Sarma PK, Rahman MM, Noor MM and Kadirgama K. Experimental Investigations of Oxygen Stripping From Feed Water in a Spray cum Tray Type Deaerator |
30/12/2010 |
Co-author |
| CONFERENCE PAPER |
Jamaluddin EH , Kadirgama K, Noor MM, Rahman MM. Method of predicting, estimating and improving mean time between failures in reducing reactive work in maintenance organization |
01/10/2009 |
Co-author |
| CONFERENCE PAPER |
Kadirgama K, Noor MM, Rahman MM, Rosli AB and Mohammad B. Experimental and Numerical Study of Cutting Force in End-Milling Operation Using Statistical Method |
08/05/2009 |
Co-author |
| CONFERENCE PAPER |
Kadirgama K, Noor MM, Rejab MRM, Rahman MM, Sani MSM, Mon TT. Effect of End Milling Parameters on Surface Roughness Subjected To Submarine Component Machining |
25/06/2009 |
Co-author |
| CONFERENCE PAPER |
Kadirgama K, Noor MM, Sani MSM, Rahman MM, Rejab MRM, Taib MY, Sulaiman A, Ibrahim A and Rosli AB.Student Performance Analysis using Artificial Intelligent Technique |
22/06/2009 |
Co-author |
| CONFERENCE PAPER |
Kadirgama K, Noor MM, Sani MSM, Rahman MM, Rejab MRM, Taib MY, Sulaiman A, Ibrahim A, Rosli AB. Development of Genetic Algorithms and Multilayer Perceptron Neural Network (MPNN) Model to Study the Student Performance in Thermodynamics |
25/08/2009 |
Co-author |
| CONFERENCE PAPER |
Mohyaldeen HM, Rahman MM, Noor MM and Kadirgama K. Method of predicting, estimating and improving mean time between failures in reducing reactive work in maintenance organization |
01/10/2009 |
Main author |
| CONFERENCE PAPER |
Noor MM, Kadirgama K, Daud R, Rahman MM, Rejab MRM, Sani MSM and Rahman AAA. Optimize Parameter of Orthogonal and Oblique Cutting Using Adaptive Network-Fuzzy Inference System |
25/06/2009 |
Co-author |
| CONFERENCE PAPER |
Noor MM, Kadirgama K, Rahman MM, Rejab MRM, Rosli AB. Abdullah Ibrahim Education Reform Model at Faculty of Mechanical Engineering, Universiti Malaysia Pahang |
26/04/2009 |
Co-author |
| CONFERENCE PAPER |
Noor MM, Kadirgama K, Rahman MM, Rosli AB, Haron HC. Response Surface Method and Neural Network to Determine Surface Roughness for Laser Cutting on Acrylic Sheets |
08/05/2009 |
CO-author |
| CONFERENCE PAPER |
Noor MM, Kadirgama K, Rahman MM, Taib MY, Rejab MRM, Sani MSM, Sulaiman A, Ibrahim A and Rosli AB. The Effect of Entry Qualifications and Gender towards Student Performance |
18/05/2009 |
Co-author |
| CONFERENCE PAPER |
Noor MM, Kadirgama K, Rejab MRM, Rahman MM, Rosli AB and Ismail H. Artificial Intelligent Model to Predict Surface Roughness in Laser Machining |
03/06/2009 |
Co-author |
| CONFERENCE PAPER |
Noor MM, Kadirgama K, Rejab MRM, Rahman MM, Sani MSM, Taib MY, Ibrahim A and Rosli AB.The Effect of Entry Qualification to the Student Performance |
22/06/2009 |
Co-author |
| CONFERENCE PAPER |
Noor MM, Omar MA, Subuki I, Kadirgama K, Sani MSM, Rahman MM and Hamedon Z.Effect of Palm Stearin Content on the Properties of Injection Moulded 316L Stainless Steel Powder
|
22/06/2009 |
Co-author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Abdullah S and Rosli AB. Fatigue life prediction of cylinder head for two-stroke linear engine: A FEM Appraoch |
23/01/2009 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Kesulai SA, Rejab MRM, Sani MSM, Kadirgama K and Noor MM. Fatigue Life Prediction of Lower Suspension Arm Using Strain-Life Approach |
25/06/2009 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Kesulai SA, Rejab MRM, Sani MSM, Kadirgama K and Noor MM. Fatigue life prediction of lower suspension arm using strain-life approach |
25/06/2009 |
Co-author |
| CONFERENCE PAPER |
Rahman MM, Mohammed MK, Rosli AB and Sani MSM. Study of air fuel ratio and instantaneous behavior on crank angle of four cylinder direct injection hydrogen fueled engine |
03/07/2009 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Muhamed MK and Rosli AB. Effect Of Air-Fuel Ratio On Engine Performance Of Single Cylinder Port Injection Hydrogen Fueled Engine: A Numerical Study |
21/03/2009 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Noor MM, Kadirgama K, Rosli AB and Rejab MRM. Finite Element Modelling, Analysis and Fatigue Life Prediction of Lower Suspension Arm |
22/06/2009 |
Main author |
| CONFERENCE PAPER |
Rejab MRM, Hassan, WAW, Noor MM, Kadirgama K, Rahman MM and Alias A. Energy Absorption Efficiency of Polymeric Foams under Static Compression Loading |
17/02/2009 |
CO-author |
| CONFERENCE PAPER |
Rejab MRM, Kadirgama K, Noor MM, Rahman MM, Sani MSM and Alias A. Development of compressive-shear test rig for polymeric foam material behaviours |
13/10/2009 |
Co-author |
| CONFERENCE PAPER |
Rejab MRM, Kadirgama K, Noor MM, Sani MSM, Rahman MM and Alias A. Composite Sandwich Panel Assessment under Static Loading |
25/06/2009 |
Co-author |
| CONFERENCE PAPER |
Sani MSM, Noor MM, Kadirgama K, Rahman MM, Senawi A, Rejab MRM, Taib MY, Ibrahim A. Exit Surveys Assessment of Bachelor Mechanical Engineering Programs at Universiti Malaysia Pahang |
22/06/2009 |
Co-author |
| CONFERENCE PAPER |
Sani MSM, Rasid MHA, Rejab MRM, Noor MM, Kadirgama K and Rahman MM. Experimental Study on Noise Source Identification of Split Unit Air Conditioner System |
25/06/2009 |
Co-author |
| CONFERENCE PAPER |
Sani MSM, Senawi A, Noor MM, Rahman MM, Taib MY, Sulaiman A, Kadirgama K, Tomadi SH, Daud R, Rejab MRM. Quantitative Assessment of Bachelor Mechanical Engineering Programs by Senior Exit Surveys at Universiti Malaysia Pahang |
18/05/2009 |
Co-author |
| JOURNAL |
Al-Asady NA, Abdullah S, Ariffin AK, Beden SM and Rahman MM. FEA based durability using strain-life models for different medium carbon steel as fabrication materials for an automotive component |
30/12/2009 |
Co-author |
| JOURNAL |
Al-asady NA, Abdullah S, Ariffin AK, Bedan SM and Rahman MM.Comparison between experimental road data and finite element analysis data for automotive lower suspension arm |
30/12/2009 |
Co-author |
| JOURNAL |
Bedan SM, Abdullah S, Ariffin AK, Al-asady NA and Rahman MM. Fatigue life assessment of different steel-based shell materials under variable amplitude loading |
30/12/2009 |
Co-author |
| JOURNAL |
Kadirgama K, Noor MM and Rahman MM. Effect of Milling Parameters on Frictions when Milling Hastelloy C-22HS: A FEM and Statistical Method |
30/12/2009 |
Co-author |
| JOURNAL |
Kadirgama K, Noor MM, Rahman MM, Harun WSW and Haron CHC. Finite Element Analysis and Statistical Method to Determine Temperature Distribution on Cutting Tool in End-Milling |
30/12/2009 |
Co-author |
| JOURNAL |
Kadirgama K, Noor MM, Rahman MM, Rejab MRM, Haron CHC and Abou-El-Hossein KA. Surface Roughness Prediction Model Of Aluminium Alloys 6061-T6 Machining Using Statistical Method |
30/12/2009 |
Co-author |
| JOURNAL |
Kadirgama K, Noor MM, Rahman MM, Rosli AB and Abou-El-Hossein KA. Fourth Order Torque Prediction Model in End Milling |
30/12/2009 |
Co-author |
| JOURNAL |
Kadirgama K, Noor MM, Zuki.NMNM, Rahman MM, Rejab MRM, Daud R, Abou-El-Hossein KA. Optimization of Cutting Force and Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) using Response Surface Method and Radian Basis Function Network |
30/12/2009 |
CO-author |
| JOURNAL |
Noor MM,Kadirgama K, Ali A, Rahman MM and Ghazalli Z. Prediction of End-of-Life Strategies for Household Equipments using Artificial Intelligent |
30/12/2009 |
Co-author |
| JOURNAL |
Noor MM,Kadirgama K, Rahman MM, Rejab MRM, Rosli AB and Ibrahim A. Education Reform Model at Faculty of Mechanical Engineering, Universiti Malaysia Pahang |
30/12/2009 |
Co-author |
| JOURNAL |
Rahman MM, Ariffin AK, Abdullah S, Noor MM and Rosli AB. Durability Assessment of Cylinder Block for Two Stroke Free Piston Linear Engine using Random Loading |
30/12/2009 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Finite Element based Vibration Fatigue Analysis for A New Free Piston Engine Component |
30/12/2009 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Rejab MRM, Kadirgama K and Noor MM. Multiaxial Fatigue Behaviour of Cylinder Head for a Free Piston Linear Engine |
30/12/2009 |
Main author |
| JOURNAL |
Rahman MM, Kadirgama K, Noor MM, Rejab MRM and Kesulai SA. Fatigue Life Prediction of Lower Suspension Arm using Strain-Life Approach |
30/12/2009 |
Main author |
| JOURNAL |
Rahman MM, Mohammed MK and Rosli AB. Air Fuel Ratio on Engine Performance and Instantaneous Behaviour of Crank Angle for Four Cylinder Direct Injection Hydrogen Fueled Engine |
30/12/2009 |
Main author |
| JOURNAL |
Rahman MM, Mohammed MK and Rosli AB. Effects Of Engine Speed and Injection Timing And Engine Performance For 4-Cylinder DI Hydrogen Fueled Engine |
30/12/2009 |
Main author |
| JOURNAL |
Rahman MM, Mohammed MK and Rosli AB. Effects of Air Fuel Ratio and Engine Speed on Performance of Hydrogen Fueled Port Injection Engine |
30/12/2009 |
Main author |
| JOURNAL |
Rahman MM, Mohammed MK and Rosli AB. Trends of Rotational Speed on Engine Performance for Four Cylinder Direct Injection Hydrogen Fueled Engine |
30/12/2009 |
Main author |
| JOURNAL |
Rahman MM, Mohammed MK and Rosli AB.Effects of Air Fuel Ratio and Engine Speed on Performance of Hydrogen Fueled Port Injection Engine |
30/12/2009 |
Main author |
| JOURNAL |
Rahman MM, Noor MM, Kadirgama K and Rejab MRM. Study of air Fuel Ratio on Engine Performance of Direct Injection Hydrogen Fueled Engine |
30/12/2009 |
Main author |
| JOURNAL |
Rahman MM, Rosli AB, Noor MM, Sani MSM and Mohamed JJ. Effects of spot diameter and sheets thickness on fatigue life of spot welded structure based on FEA approach |
30/12/2009 |
Main author |
| JOURNAL |
Rahman MM, Rosli AB, Rejab MRM, Abdullah S and Noor MM. Assessment of Surface Treatment on Fatigue Life of Cylinder Block for Linear Engine using Frequency Response Approach |
30/12/2009 |
Main author |
| JOURNAL |
Rosli AB, Muhamed MK and Rahman MM. Numerical Study on the Performance Characteristics of Hydrogen Fueled Port Injection Internal Combustion Engine |
30/12/2009 |
Main author |
| CONFERENCE PAPER |
Abdullah S, Beden SM, Ariffin AK, Nopiah, Zaharim A and Rahman MM. Fatigue Life Assessment of A ZM Shell Structure from Different Steel Types: A Case Study Using Variable Amplitude Loadings |
25/09/2008 |
Co-author |
| CONFERENCE PAPER |
Al-Asady NA, Abdullah S, Ariffin AK and MRahman MM. Effects of surface finish on the fatigue life assessment using finite element analysis: A case study of a lower suspension arm |
17/07/2008 |
Co-author |
| CONFERENCE PAPER |
Al-Asady NA, Abdullah S, Ariffin AK, Beden SM and Rahman MM. Effect of shot peening process on lower suspension arm: A case study in FEA based durability |
13/09/2008 |
Co-author |
| CONFERENCE PAPER |
Al-Asady NA, Abdullah S, Ariffin AK, Beden SM and Rahman MM. FEA-Based Fatigue Assessment of Different Medium Carbon Steel as a fabrication Materials For an Automotive Component |
03/12/2008 |
Co-author |
| CONFERENCE PAPER |
Al-Asady NA, Abdullah S, Ariffin AK, Rahman MM and Beden SM. Improving the automotive lower suspension arm durability using finite element analysis |
16/06/2008 |
Co-author |
| CONFERENCE PAPER |
Bedan SM, Abdullah S, Ariffin AK, Rahman MM And Al-Asady NA. Effect of Mesh Size of Finite Element Analysis in Fatigue Life Assessment for Pipe Elbows
|
15/07/2008 |
Co-author |
| CONFERENCE PAPER |
Beden SM, Abdullah S, Ariffin AK and Rahman MM. Using Stress and Strain Live Methods for Fatigue Life Prediction of Shell Structure under Constant and Variable Amplitude Loading
|
13/09/2008 |
Co-author |
| CONFERENCE PAPER |
Kadirgama K, Noor MM, Daud R, Rahman MM, Zuki NMNM, Rejab MRM, Mohammad B. Design and Development of Blow Mould using Machining Optimization Parameters |
29/10/2008 |
Co-author |
| CONFERENCE PAPER |
Kadirgama K, Noor MM, Rahman MM, Sani MSM, Zuki.NMNM, Abou-El-Hossein KA. Prediction Modelling of Power in End-Milling |
19/12/2008 |
Co-author |
| CONFERENCE PAPER |
Kadirgama K, Noor MM, Zuki NMNM, Rejab MRM, Sani MSM, Rahman MM. Design a New Household Recycle Trash Bin |
17/12/2008 |
Co-author |
| CONFERENCE PAPER |
Mohamed NMZN, Rahman MM, Azmir MA, Noor MM and Hafizuddin M. Regenerative Chatter in End Milling on Mould Aluminum Alloy
|
10/06/2008 |
Co-author |
| CONFERENCE PAPER |
Noor MM, Kadirgama K, Rahman MM, Sani MSM, Rejab MRM. Development of Auto Car Jack Using Internal Car 12 volts Power |
17/12/2008 |
Co-author |
| CONFERENCE PAPER |
Noor MM, Rahman MM, Kadirgama Ghazali KZ and Rejab MRM. Development of A Cutting Tool for Printed Circuit Board Using Mild Steel
|
10/06/2008 |
Co-author |
| CONFERENCE PAPER |
Noor MM, Rejab MRM, Sani MSM, Sulaiman A, Rahman MM, Kadirgama K, Rose ANM, Rosli AB. Quality Management System in the Implementation of OBE at Faculty of Mechanical Engineering, Universiti Malaysia Pahang |
21/10/2008 |
Co-author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK and Rosli AB. Finite Element based Durability Assessment of Automotive Component
|
16/03/2008 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Abdullah S and Rosli AB. Finite Element Based Fatigue Life Prediction of Cylinder Head for Two-Stroke Linear Engine. |
10/06/2008 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Abdullah S, Rejab MRM and Rosli AB. Durability Assessment of cylinder block for two-stroke free piston linear engine using narrow band approach |
17/07/2008 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Mohammed MK and Rosli AB. Effects Of Air Fuel Ratio On The Performance of port injection Hydrogen Fueled Engine |
19/12/2008 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Mohammed MK and Rosli AB. Trends Of Air Fuel Ratio And Crank Angle On Engine Performance of Four Cylinder Direct Injection Hydrogen Fueled Engine |
27/11/2008 |
Main auhtor |
| CONFERENCE PAPER |
Rahman MM, Rosli AB, Noor MM, Sani MSM and Julie JM . Effects of spot diameter and sheets thickness on fatigue life of spot welded structure based on FEA |
23/05/2008 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Rosli AB, Sani MSM and Noor MM. Investigation Into Surface Treatment On Fatigue Life For Cylinder Block Of Linear Engine Using Frequency Response Approach |
10/07/2008 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Sani MSM, Rejab MRM, Noor MM, Kadirgama K. Study of Air Fuel Ratio on Engine Performance of Direct Injection Hydrogen Fuelled Engine |
17/12/2008 |
Co-author |
| CONFERENCE PAPER |
Rejab MRM, ZRahman MM, Hamedon, Sani MSM, Noor MM, Kadirgama K. An Evaluation of Profiles for Disk Cams with In-line Roller Followers in Horizontal Position |
17/12/2008 |
CO-author |
| CONFERENCE PAPER |
Rejab MRM, Noor MM, Rahman MM, Sulaiman A, Kadirgama K, Sani MSM, Rose ANM, Zahid MNO and Rosli AB. Implementation of Outcome Based Education in the Faculty of Mechanical Engineering, Universiti Malaysia Pahang: An Experience |
21/10/2008 |
Co-author |
| CONFERENCE PAPER |
Rejab MRM, Rahman MM, Noor MM and Kadirgama K. Effect of Multiaxial Testing on Polymeric Foams Performance for Shear-Compressive Loading |
19/12/2008 |
CO-author |
| CONFERENCE PAPER |
Rejab MRM, Theng CW, Rahman MM, Noor MM and Rose ANM. An Investigation into the Effects of Fibre Volume Fraction on GFRP Plate. |
16/03/2008 |
Co-author |
| CONFERENCE PAPER |
Rose ANM, Noor MM, Mohamed JJ, Rejab MRM, Khairof M and Rahman MM. Polypropylene Reinforced with Recycle Polyethylene Terephthalate as an Alternative materials for New Plastic Product |
10/06/2008 |
Co-author |
| CONFERENCE PAPER |
Sani MSM, Ming GL, Rahman MM, Sulaiman A, Mon TT, Kadirgama K and Noor MM. Dynamic Correlation Technique and Model Updating on Go Kart Chassis Structure |
19/12/2008 |
Co-author |
| CONFERENCE PAPER |
Sani MSM, Rahman MM, Noor MM, Kadirgama K, Rejab MRM. Study on Dynamic Characteristics of Automotive Shock Absorber System |
17/12/2008 |
Co-author |
| CONFERENCE PAPER |
Zuki NM, Rahman MM, Noor MM, Kadirgama K and Rejab MRM. An Investigation into the Effect of Materials on Joining for Automotive Panel using Tailor Welded Blanks |
17/07/2008 |
CO-author |
| JOURNAL |
1. Alam, MJB, Awal ASMA, Alam M Jobair B, Rahman MM, Rahman MS, Banik BK, Islam S.Fly-Ash as Admixture in Manufacturing of Cement A Case Study. |
30/12/2008 |
Co-author |
| JOURNAL |
Abdullah S, Al-Asady NA, Ariffin AK and Rahman MM.A Review on Finite Element Analysis Approaches in Durability Assessment of Automotive Components |
30/12/2008 |
Co-author |
| JOURNAL |
Abdullah S, Beden SM, Ariffin AK and MRahman MM. Fatigue Life Assessment for Metallic Structure: A Case Study of Shell Structure under Variable Amplitude Loading |
30/12/2008 |
Co-author |
| JOURNAL |
Abdullah S, Beden SM, Ariffin AK and Rahman MM. Fatigue Life Assessment for Metallic Structure: A Case Study of Shell Structure under Variable Amplitude Loading |
30/12/2008 |
Co-author |
| JOURNAL |
Bedan SM, Abdullah S, Ariffin AK, Al-asady NA and Rahman MM. Fatigue life assessment of different steel-based shell materials under variable amplitude loading |
30/12/2008 |
Co-author |
| JOURNAL |
Bedan SM, Abdullah S, Ariffin AK, Al-asady NA, Rahman MM. Fatigue life assessment of different steel-based shell materials under variable amplitude loading |
30/12/2008 |
Co-author |
| JOURNAL |
Bedan SM, Abdullah S, Ariffin AK, Al-asady NA, Rahman MM. Fatigue life assessment of different steel-based shell materials under variable amplitude loading |
30/12/2008 |
Main author |
| JOURNAL |
Kadirgama K, Noor MM, Zuki.NMNM, Rahman MM, Rejab MRM, Daud R, Abou-El-Hossein KA. Optimization of Cutting Force and Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) using Response Surface Method and Radian Basis Function Network. |
30/12/2008 |
Co-author |
| JOURNAL |
Rahman MM and Rosli AB. Assessment of fatigue life behavior of cylinder block for free piston engine using frequency response approach |
30/12/2008 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Abdullah S, Noor MM, Rosli AB and Maleque MA. Finite element based fatigue life prediction of cylinder head for two-stroke linear engine using stress-life approach |
30/12/2008 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N, Abdullah S and Noor MM. Finite element based fatigue life prediction of a new free piston engine mounting |
30/12/2008 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N, Haron CHC and Rosli AB. Fatigue Life Prediction of Two-Stroke Free Piston Engine Mounting using Frequency Response Approach |
30/12/2008 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N, Haron CHC and Rosli AB. Fatigue Life Prediction of Two-Stroke Free Piston Engine Mounting using Frequency Response Approach |
30/12/2008 |
Main author |
| JOURNAL |
Rahman MM, Rosli AB, Noor MM, Rejab MRM and Sani MSM. Fatigue Life Prediction of Spot-Welded Structures: A Finite Element Analysis Approach |
30/12/2008 |
Main author |
| CONFERENCE PAPER |
Al-Asady NA, Abdullah S, Ariffin AK and Rahman MM. Fatigue Life Prediction of a Lower Suspension Arm for an Automotive using FEA approach
|
28/11/2007 |
Co-author |
| CONFERENCE PAPER |
Beden SM, Abdullah S, Ariffin AK and Rahman MM. Life Prediction of Shell Structure under Variable Amplitude Loadings |
26/10/2007 |
Co-author |
| CONFERENCE PAPER |
Beden SM, Abdullah S, Ariffin AK and Rahman MM. Study of Crack Initiation in Shell Structure using Finite Element Analysis |
28/11/2007 |
CO-author |
| CONFERENCE PAPER |
Ibrahim NMIN, Ismail A, Rahim MF, Bakar RA and Rahman MM. Visualization of the Scavenging Process for Two-stroke Spark Ignition (SI) Engine using CFD
|
11/12/2007 |
Co-author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Abdullah S and Rosli AB. Assessment of Multiaxial Fatigue Behavior of Cylinder Head for A New Free Piston Linear Engine |
31/12/2007 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Rosli AB, Noor MM, Sani MSM and Rejab MRM. Fatigue Analysis of Spot-welded Joints using Finite Element Analysis Approach |
28/11/2007 |
Main author |
| CONFERENCE PAPER |
Rosli AB, Othman MF, Sulaiman AS and Rahman MM. Stress Analysis of the Compressed Natural Gas (CNG) type-1 Pressure Vessel: Cylindical Part
|
11/12/2007 |
Co-author |
| JOURNAL |
Rahman MM, Ariffin AK and Abdullah S. Finite Element Based Vibration Fatigue Analysis of a New Two-stroke Linear Generator Engine Component |
30/12/2007 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK and Mohamed NAN.Investigate the Influences of shot peening on the Fatigue Life of Vibrating Cylinder Block for a New Free Piston Linear Engine |
30/06/2007 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N and Abdullah S. Effect of Nitriding Treatment on Fatigue life for Free Piston Linear Engine Component using Frequency Response Method: A Finite Element Approach |
30/12/2007 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Finite element based durability assessment of a free piston linear engine component |
30/09/2007 |
Main author |
| JOURNAL |
Rahman MM and Ariffin AK. Effects of Surface Finish and Treatment on the Fatigue Behavior of Vibrating Cylinder Block using Frequency Response Approach. |
30/06/2006 |
Main author |
| JOURNAL |
Rahman MM and Ariffin AK. Finite Element Analysis of Dynamic Characteristics of Journal Bearing in the New Two-Stroke Free Piston Engine |
30/12/2006 |
Main author |
| JOURNAL |
Rahman MM and Ariffin AK. Finite Element Analysis of Dynamic Characteristics of Journal Bearing in the New Two-Stroke Free Piston Engine |
30/06/2006 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Static and Dynamic Characteristics of Journal Bearing in the Linear Generator Engine |
30/12/2006 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Durability Assessment of a New Free Piston Spark Ignition Engine: A Computational Approach |
30/06/2006 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Fatigue Behavior of 6000 Series Aluminum Alloys on Cylinder Block of a Free Piston Engine using Total Life Approach |
29/12/2006 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Influence of surface treatments on fatigue life of a free piston linear generator engine component using Narrow band approach |
30/12/2006 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Influence of surface treatments on fatigue life of a free piston linear generator engine component using Random Loading |
30/12/2006 |
Main author |
| JOURNAL |
Rahman MM and Ariffin AK. Finite element based Fatigue Life Prediction of Vibrating Cylinder block of a New Two-stroke Free Piston Engine |
30/12/2005 |
Main author |
| JOURNAL |
Rahman MM and Ariffin AK. The Role of Nitriding on the Fatigue Life of a New Free Piston Engine Component: Finite Element based Investigation |
30/12/2005 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Finite Element Analysis of Journal Bearing in the Linear Generator Engine
|
30/06/2005 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Vibration Fatigue Analysis of Cylinder Head of a New Two-stroke Free Piston Engine Using Finite Element Approach (Scopus Index) |
30/12/2005 |
Main author |
| JOURNAL |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Finite Element Based Contact Analysis of Linear Generator Engine |
30/10/2004 |
Main author |
NON-REFEREED PUBLICATION |
| ARTICLE |
Rahman MM and Abdullah MP. Alternative Materials Choice: Challenges to use Titanium Alloys in Automotive Industries |
30/06/2010 |
Main author |
| CONFERENCE PAPER |
Rahman MM and Ariffin AK. Effects of Surface Finish and Treatment on the Fatigue Behaviour of Vibrating Cylinder Block using Frequency Response Approach
|
25/11/2005 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK and Tulus. Influence of surface treatments of fatigue life of a free piston engine linear generator engine components using random loading
|
26/08/2005 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Analytical and Finite Element based Fatigue Life Assessment of Vibration Induced Fatigue Damage. |
27/05/2005 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Fundamental Aspects of Finite Element Based Durability and Fatigue Analysis of Linear Generator Engine. |
31/05/2005 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Prediction of Fatigue Life of Aluminum Alloys Cylinder Block Subjected to Constant and Variable Amplitude Loading Conditions using Total Life Approach. |
18/08/2005 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Prediction of Fatigue Lifetime Caused to Vibrating Cylinder Block of A Two-Stroke Free Piston Engine Using Transient Dynamic Approach.
|
08/12/2005 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Vibration Fatigue Analysis of Linear Generator Engine Using Frequency Response Approach |
18/05/2005 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Vibration Fatigue Analysis of Linear Generator Engine Using Frequency Response Approach
|
18/05/2005 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Modeling and Analysis of Cylinder Block of Linear Generator Engine for Fatigue Durability |
09/04/2005 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Prediction of Lifetime of Cylinder head in the Two-stroke Free Piston Engine |
12/05/2005 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Nuraini AA and Khan MMA. Effects of Surface Treatments on the Fatigue Behaviour of Cylinder Block for A New Two-Stroke Free Piston Engine |
30/12/2005 |
Main author |
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Jamaluddin N and Haron CHC. Durability and Fatigue analysis of linear Engine |
11/08/2004 |
Main author
|
| CONFERENCE PAPER |
Rahman MM, Ariffin AK, Jamaludin N and Haron CHC. Contact Analysis of Piston Rings and Cylinder Liner in the Linear Generator Engine |
12/10/2003 |
Main author |
| CONFERENCE PAPER |
Abdul Malek ABM, Khan MMA and Rahman MM. Greenhouse Gas Emission: Bangladesh Perspective |
17/02/2002 |
Co-author |
| CONFERENCE PAPER |
Rahman MM and Khan MMA. A Strategic Approach of Environmentally Clean Machining |
28/12/2001 |
Main author |
| CONFERENCE PAPER |
Ahsan MH, Saklyen MA, Rahman MM, and Islam MN. Design of a Small Scale Radiography Facility Using a 252 Cf Neutron Source for Shahjalal University of Science and Technology, Sylhet, Bangladesh |
21/05/1999 |
Co-author |
| CONFERENCE PAPER |
Rahman, MM and Islam, AKMS. Prediction of Secondary Recirculation in Laminar Flow Through Planar and Annular Backsteps |
23/09/1997 |
Main author |
| CONFERENCE PAPER |
Islam, AKMS and Rahman MM. Prediction of Laminar Separation over an Annular Backsteps |
30/12/1995 |
Main author |
|
| |
|
|
