NO. |
TITLE |
ROLE |
START DATE |
END DATE |
STATUS |
1. |
THE EFFECTS OF CAR SEAT STRUCTURAL DYNAMICS TO THE HUMAN SEATING COMFORT |
Member |
25-APR-2018 |
24-JUL-2020 |
Tamat (Laporan akhir dikembalikan dan perlu dihantar semula) |
2. |
DEVELOPMENT OF STEER BY WIRE FOR AUTOMOTIVE APPLICATION |
Member |
01-APR-2018 |
30-JUN-2020 |
Selesai (Mencapai Sebahagian KPI) |
3. |
An investigation into the effects of resonances on the time delay estimation for leak detection in plastic water distribution pipes |
Member |
15-AUG-2017 |
14-NOV-2020 |
Selesai (Tidak Mencapai KPI) |
4. |
Investigation on Electric Motor as an Actuator of Anti Skid Control System to Improve the Safety of Small Electric Vehicle |
Member |
01-AUG-2016 |
31-JUL-2019 |
Selesai (Mencapai Semua KPI) |
5. |
The Effect of Soft Ironcore Lamination Removal towards Cogging Torque in an Electric Generator |
Member |
01-AUG-2016 |
31-JUL-2018 |
Selesai (Tidak Mencapai KPI) |
6. |
Motion Control Algorithm Development and Testing for a Free-piston Engine Generator |
Member |
25-JUN-2016 |
24-JUN-2018 |
Tamat (Tutup Projek) |
7. |
Development of a low power micro-sheet-forming machine for micro-products production |
Member |
25-MAY-2016 |
24-MAY-2017 |
Tamat (Tutup Projek) |
8. |
Development of a Magnetorheological Pinched Mode Valve for Automotive Semi-Automotive Semi-Active Suspension System |
Member |
05-MAY-2016 |
04-MAY-2018 |
Tamat (Perlu hantar laporan akhir) |
9. |
Development of Semi-Active Car Absorber System |
Member |
05-APR-2016 |
04-APR-2018 |
Selesai (Mencapai Semua KPI) |
10. |
A Study of Tyre Cavity Resonance Noise effect to Vehicle Cabin Acoustic Level |
Member |
01-OCT-2015 |
30-SEP-2017 |
Tamat (Tutup Projek) |
11. |
Development of an aluminium coreless ironless generator for EV applications |
Member |
01-OCT-2015 |
30-SEP-2017 |
Tamat (Tutup Projek) |
12. |
Development of Bearing Fault Detection System based on Vibration Signal |
Member |
15-NOV-2014 |
14-NOV-2016 |
Tamat (Tutup Projek) |
13. |
Pemindahan Teknologi Sistem Kawalan, Rekabentuk Percetakan Plastik dan Pengurusan Kejuruteraan Dalam Industri Plastik |
Member |
01-SEP-2014 |
31-AUG-2016 |
Tamat (Perlu hantar laporan akhir) |
14. |
Design and Development of Six Degrees of Freedoms Articulated Robot Arm for Painting |
Leader |
15-MAY-2014 |
14-MAY-2016 |
Tamat (Tutup Projek) |
15. |
Low Frequency Modulation of Ultrasonic Guided Wave Method for small Crack Pipeline Detection |
Leader |
25-DEC-2013 |
24-DEC-2015 |
Tamat (Tutup Projek) |
16. |
Leak Detection in a Steel Pipeline System by Empirical Mode Decomposition (emd) Analysis of a Pressure Transient |
Member |
01-DEC-2013 |
30-NOV-2015 |
Tamat (Tutup Projek) |
17. |
Development of a New Comprehensive Model-based Controller using Arduino and Android Applications in Intensive Critical Unit, Hospital Tengku Ampuan Afzan, Kuantan |
Member |
01-DEC-2013 |
30-NOV-2015 |
Tamat (Tutup Projek) |
18. |
Electromagnetic Braking Effect for Power Steering System |
Leader |
25-NOV-2013 |
24-MAY-2016 |
Tamat (Tutup Projek) |
19. |
Enhancement of Stress Resistance in Squeezed Mode MR Fluid Through Optimization of Materials Parameters |
Member |
17-SEP-2013 |
16-SEP-2015 |
Tamat (Tutup Projek) |
20. |
Development of Prototype Semi-Active Absorber Utilizing Piezoelectric Ultrasonic Motor |
Member |
15-MAY-2013 |
14-MAY-2015 |
Tamat (Tutup Projek) |
21. |
Development of a Permanent Magnet Motion Driver for Electricity Power Generation and Vehicles |
Member |
15-MAY-2013 |
14-MAY-2015 |
Tamat (Perlu hantar laporan akhir) |
22. |
Development of a Portable Quality-Confirmation Inspection Unit for Automotive Checking Fixture |
Member |
15-MAY-2013 |
14-MAY-2015 |
Tamat (Tutup Projek) |
23. |
A New Technique of Leak Detection in a Gas Pipeline
Network Based on Time Reversal Method and Non Linear
Acoustic
|
Member |
01-APR-2013 |
31-MAR-2016 |
Selesai (Mencapai Semua KPI) |
24. |
DESIGN AND DEVELOPMENT OF PLUG IN ELECTRIC VEHICLE FOR PROTON GREEN MOBILITY CHALLENGE (PGMC) 2012: THE UMP-EV TEAM |
Member |
20-JAN-2012 |
30-SEP-2012 |
Tamat (Perlu hantar laporan akhir) |
25. |
Development of Real Time Monitoring Welding Defect Detection System |
Member |
15-DEC-2011 |
15-JUN-2014 |
Tamat (Tutup Projek) |
26. |
Electrostatic Charging of Diesel Particulate Matter from Automobile Exhaust Gas |
Member |
08-JUL-2011 |
08-JUL-2013 |
Selesai (Mencapai Semua KPI) |
27. |
Mixture Formulation and Combustion Characteristics of Diesel-Hydrogen Dual Fuel Engine |
Leader |
15-SEP-2010 |
14-SEP-2012 |
Selesai (Mencapai Semua KPI) |
28. |
Mixture Formulation and Combustion Characteristics of Diesel-Hydrogen Dual Fuel Engine |
Member |
15-SEP-2010 |
14-SEP-2012 |
Selesai (Mencapai Semua KPI) |
29. |
Design and Fabrication of Solar Car Body and Chassis |
Member |
01-AUG-2010 |
31-JUL-2011 |
Tamat (Perlu hantar laporan akhir) |
30. |
Design and Fabrication of Solar Car Power and Drive System |
Member |
01-MAY-2010 |
30-APR-2011 |
Tamat (Perlu hantar laporan akhir) |
31. |
Design and Development Of Magneto-Rheological Damper |
Leader |
01-DEC-2009 |
31-MAY-2011 |
Tamat (Perlu hantar laporan akhir) |
32. |
Design Of mixer System For Diesel-Water Emulsion As New Renewable Fuel |
Member |
01-OCT-2009 |
30-NOV-2010 |
Selesai (Mencapai Semua KPI) |